Author Topic: Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R  (Read 381 times)

breakz

  • Newbie
  • *
  • Posts: 4
Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
« on: September 25, 2005, 02:04:05 AM »
HI to ALL!

I'm NEW and I HAVE a TECHNICAL QUESTION about PC ENGINE DUO-R:

I have thid console with original power suplly and it funtions very well but to use it ( i live in Italy) i must use a step-down convertor (220 to 110 Volts)...The Question is:

- Do you know any AC POWER SUPPLY THAT directly gives to DUO-R 9v and 1000 ma from 220 Volts.......or similar?

- Do you  know any ac power supllies of other consoles that are good for DUO-R ( WITH THE SAME TECHNICAL REQUESTS and WITH THE SAME PLUG o fthe DUO-R)?

now bye and thanks for all!......and REPLY ME SOON! :p

rolins

  • Hero Member
  • *****
  • Posts: 1059
Re: Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for D
« Reply #1 on: September 25, 2005, 07:15:39 AM »
Welcome to the forum. Hope you enjoy it here. Everyone here is alright and we always try to help out.

Quote from: "breakz"
- Do you know any AC POWER SUPPLY THAT directly gives to DUO-R 9v and 1000 ma from 220 Volts.......or similar?


There is, but I cannot remember. I did see some one selling such a AC adaptor on ebay a few months ago, but I don't know how reliable they are. They might be just ordinary multi-adaptors.

Quote from: "breakz"
- Do you  know any ac power supllies of other consoles that are good for DUO-R ( WITH THE SAME TECHNICAL REQUESTS and WITH THE SAME PLUG o fthe DUO-R)?


I suggest sticking to your original AC adaptor and step down converter. It's much more reliable and safer.

Keranu

  • Hero Member
  • *****
  • Posts: 9054
Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
« Reply #2 on: September 25, 2005, 08:33:28 AM »
There seems to be tons of power supply questions since the summer time.
Quote from: Bonknuts
Adding PCE console specific layer on top of that, makes for an interesting challenge (no, not a reference to Ys II).

Nutribrain

  • Full Member
  • ***
  • Posts: 137
Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
« Reply #3 on: September 25, 2005, 03:26:35 PM »
Just try and visit your local electronic dealer like Conrad Electronics and ask him for an adaptor with the right specifications. I have all my consoles hooked up to normal adaptors except the PC-FX because it hat the adaptor built right into the console. My PCE and SGX for example are hooked up to "normal" standard adaptor with multiple connectors.

Kaminari

  • Sr. Member
  • ****
  • Posts: 260
Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
« Reply #4 on: September 25, 2005, 04:06:49 PM »
Agreed. Go to Conrad and search for "Voltcraft SNG". That's the adaptor you want.

Keranu

  • Hero Member
  • *****
  • Posts: 9054
Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
« Reply #5 on: September 25, 2005, 04:49:10 PM »
I'll remember to do that if I ever get a similar problem, like how I almost did when I thought my PCE CD wouldn't have one.
Quote from: Bonknuts
Adding PCE console specific layer on top of that, makes for an interesting challenge (no, not a reference to Ys II).