« previous next »
Pages: 1 [2]

Author Topic: RGB mod question  (Read 538 times)

BlueBMW

  • Hero Member
  • *****
  • Posts: 4346
Re: RGB mod question
« Reply #15 on: April 01, 2014, 12:07:14 PM »
Plug the composite yellow cable from your console into the green port of the component in and see if you get a clear black and white picture.
Logged
[Sun 23:29] <Tatsujin> we have hard off, book off, house off, sports off, baby off, clothes off, jerk off, piss off etc

schweaty

  • Hero Member
  • *****
  • Posts: 819
Re: RGB mod question
« Reply #16 on: April 02, 2014, 04:02:00 AM »
way ahead of you guys.  i did the test per turbokon's TG-16/PC-E COMPONENT VIDEO
MOD INSTALL GUIDE a couple of days ago.  i got the black and white picture as described. 

i am using a 1st gen plasma.  the tuner box is actually separate from the tv.  lots of different kinds of inputs.  still running strong after 10 years.

Thanks for looking out though!
Logged

Eddiesamma

  • Newbie
  • *
  • Posts: 26
Re: RGB mod question
« Reply #17 on: April 06, 2014, 03:37:14 AM »
The composite into component is a great test but it's not always 100 percent my friend got a duo from turbokon and even though he passed the test the 240p still had issues on his samsung so he inevitably did what any reasonable person would do and checked craigslist and got a tube tv to play his older game consoles including his duo. But the component picture was spot on so it's a catch 22 of sorts.
Logged
Pages: 1 [2]
« previous next »