Nec Pc Engine GT Black screen after replacing video cap!

[raggio252000]

Hi there,

I tried to repair an old pc engine GT console.
In the past I repaired the same console without problems but now I had a problem with the video part, I replaced the video and audio caps but the video doesn't work, I have the same picture, a black screen. The sound works great!
I noticed that there was some battery leak.
I did a video and there are some pictures.
What can I do for the screen?

https://www.youtube.com/embed/vg4sYqEx73A

[Slypty]

Try replacing the two Backlight Caps (the two behind the Video Cap.)  Cut out the putty stuff with an exacto, be very careful because there's a transistor close to the very back one. 

  The Cap values for those two are 100uf 16V.  Good luck

[crans]

your going to stress that system.

Replace them all and be done with it for 15 years

[raggio252000]

Try replacing the two Backlight Caps (the two behind the Video Cap.)  Cut out the putty stuff with an exacto, be very careful because there's a transistor close to the very back one. 

  The Cap values for those two are 100uf 16V.  Good luck

thank you, I'll try this

[thesteve]

i can see more leaky caps in your pic