Pot replacement original Duo

[Rosser]

I am trying to revive a Duo that does not spin or play CD's I replaced the caps and swapped the complete cd unit into a duo-r and it worked perfectly. When I was hunting around on the board I noticed that the pot on Vr102 was super loose and would spin all the way around with just a touch of the finger. Does any one know if I can replace the pots with the plastic type from the DUO-R and if so do you by chance know the part number from Digi-key or mouser so I could order some I have never really messed with pots and most component parts shops are not the most user friendly
Thanks for any assistance 

[thesteve]

The pots should spin all the way around
Bad pots is unlikely

[Rosser]

yeah the issue is not with the spinning per say its more about how loose it is someone used the wrong type of screw driver or bent it

[pnauts]

I think VR102 is next to the 10K-18K range, you have to measure pitch between legs to search which one could fit (I suppose many could). I don't know how many turns are capable of the OEM trimmers, but if you wish set it precisely, it's a parameter you have to take in count.

[thesteve]

check it with a meter
if it works leave it