I resoldered the caps near IC107 ( thanks Keith!) and the voltage did drop a tiny bit, it went from
IC 107 Beside cd rom area
1- 9.36
7- 9.9
8- 9.9
to
IC 107 Beside cd rom area
1- 9.5
5 - 5
6 - 5
7- 7.5
8- 10
I tried tracing the path from the legs on the bottom of the board, i moved that chip that was blocking but didnt want to pull it up too much. I lost the traces though.
Pin 6 on IC 107 4558 - Bottom of board R134 to R140, then I couldnt find where it went next. '
Pin 7 on IC 107 4558 - Bottom of board R145 to R144 to solder joint that splits to R142 and R143.
Took some pics if it helps
![](http://pic.photobucket.com/bwe.png)
![](http://pic.photobucket.com/bwe.png)
This one looks really cool too ha!
![](http://pic.photobucket.com/bwe.png)