Turbo Grafx 16 / PC Engine / Express / GT Region Mod Chips for sale!

[thesteve]

well i just tried a 2.4 in my modded express that refused to run in a DoujinDance modded DUO and it works perfect
also TurboKon tested the ED2.4 on a white PCE with the flex board (ver3)

[Game-Tech.US]

well i just tried a 2.4 in my modded express that refused to run in a DoujinDance modded DUO and it works perfect
also TurboKon tested the ED2.4 on a white PCE with the flex board (ver3)

Excellent! So 2.4 is the hardware version or OS or firmware? That could be the reason mine isn't working, it's a v1.1 board! That the TED I sent you for testing with my pcb on the CG and white pce.
So you didn't have to add the pull-downs or the bigger cap for it to work on the CG and white pce consoles, like you suggested on mine?

[thesteve]

right, this is a 2.4 board everdrive (dont know what bios)
didnt have to do anything to it, no pull-up/down or added caps

[Game-Tech.US]

right, this is a 2.4 board everdrive (dont know what bios)
didnt have to do anything to it, no pull-up/down or added caps

Well that's great! I'll get a hold of a newer TED and retest mine, hopefully it works!

[turbokon]

Even with the older region, I never had issues with the TE V1.1.

[turbokon]

Bump

[spawnshop]

So if i understand correctly, the switchless chip does not work on consoles ATM?
I have a US TG16, so i would need to install a switch as well, correct?

That is correct.  It require you ran a wire directly to the select button.  You can't do that on the home consoles.

So I finally had the time to sit down and install the V3 Obey - man, works like a charm!   
Now I gotta pick up some PCE games!!

[turbokon]

Hey guys, I finally updated the guide for obey version 3 region chip.  It was almost two years overdue.  Sorry it took so long.

http://www.mediafire.com/file/5x6zlhvvb0ozn49/Obey_Chip_Version_3_Region_Install.pdf