« previous next »
Pages: [1]

Author Topic: Need replacement Turbo controller pc board.  (Read 242 times)

Mishran

  • Hero Member
  • *****
  • Posts: 1440
Need replacement Turbo controller pc board.
« on: April 06, 2011, 03:52:35 PM »
The board in my controller has gone haywire. My D-pad has decided to stop working. Opened it up and poked at the cable with a multimeter and all connections are good. Hooked it up to a different system and still had the same problem so I can only assume it has to be the board. If anyone has an extra they don't mind tossing my way that would be great. PWD-624 is written on it which I would assume is the model number for the board. Since there seems to be several different types of boards floating around I figured that mind come in handy for finding a match.
Logged

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Need replacement Turbo controller pc board.
« Reply #1 on: April 17, 2011, 12:53:01 PM »
check resistor r709 should be 48k if good replace IC701
Logged

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Need replacement Turbo controller pc board.
« Reply #2 on: April 17, 2011, 02:50:28 PM »
sorry i hadnt saved my notes yet
Logged

pceslayer

  • Full Member
  • ***
  • Posts: 205
Re: Need replacement Turbo controller pc board.
« Reply #3 on: April 22, 2011, 02:53:42 AM »
@thesteve

Make it a repair guide maybe? lol
« Last Edit: April 22, 2011, 03:02:56 AM by pceslayer »
Logged

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Need replacement Turbo controller pc board.
« Reply #4 on: April 22, 2011, 03:11:06 AM »
id like to know what failed first.
confirmed at least, considering I have never had one fail.

when i get a chance i will draw the whole schematic and make a basic trouble shooting guide.
Logged

pceslayer

  • Full Member
  • ***
  • Posts: 205
Re: Need replacement Turbo controller pc board.
« Reply #5 on: May 06, 2011, 06:01:15 AM »
I have a controller with the same issue thesteve. When I measure the resistance of r709 I'm getting 47.8k.

Logged

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Need replacement Turbo controller pc board.
« Reply #6 on: May 06, 2011, 08:04:27 AM »
your resistance reading is good.
check each pin on the cable, if good it appears a failed ic is to blame.

i need to draw up the schematic with pin numbers, however i did a partial attached to my second post
Logged

pceslayer

  • Full Member
  • ***
  • Posts: 205
Re: Need replacement Turbo controller pc board.
« Reply #7 on: May 06, 2011, 09:37:39 AM »
all wires test out fine
Logged

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Need replacement Turbo controller pc board.
« Reply #8 on: May 06, 2011, 10:12:40 AM »
pins 1 and 15 on ic701 should be pulsed (look at the attached text file)

you most likely need a new ic701 (its available everywhere)
Logged
Pages: [1]
« previous next »