« previous next »
Pages: [1]

Author Topic: TG16 AV mod  (Read 275 times)

Official Ninja

  • Full Member
  • ***
  • Posts: 131
TG16 AV mod
« on: September 11, 2013, 02:46:04 AM »
Nothing special, but I AV modded a TG-16. I grabbed V,L,R,G from under the board where the 69 pin connector is.
Works really good!

http://flic.kr/p/fP4zA4
Logged

fsa

  • Full Member
  • ***
  • Posts: 136
Re: TG16 AV mod
« Reply #1 on: September 11, 2013, 03:59:18 AM »
You should try the S-Video Mod. :-k
Logged
Looking for TG16 games I don't have already.

albatross

  • Full Member
  • ***
  • Posts: 196
Re: TG16 AV mod
« Reply #2 on: September 11, 2013, 04:01:24 AM »
is there a tutorial on how to do this mod?
Logged

Official Ninja

  • Full Member
  • ***
  • Posts: 131
Re: TG16 AV mod
« Reply #3 on: September 11, 2013, 05:03:59 AM »
Quote from: fsa on September 11, 2013, 03:59:18 AM
You should try the S-Video Mod. :-k

Have no use for Svideo really. I don't even have many TVs that have Svid inputs anymore.
Logged

Official Ninja

  • Full Member
  • ***
  • Posts: 131
Re: TG16 AV mod
« Reply #4 on: September 11, 2013, 05:06:00 AM »
Quote from: albatross on September 11, 2013, 04:01:24 AM
is there a tutorial on how to do this mod?


I used this link for the pins. Just find where they are on the bottom of the board. You'll need to unsolder or bend the shielding back (I bent it back). Then its a simple task of drill holes and soldering the wires to the rca jacks.

http://www.cgquarterly.com/articles/tg16_cable.htm
Logged

albatross

  • Full Member
  • ***
  • Posts: 196
Re: TG16 AV mod
« Reply #5 on: September 11, 2013, 05:53:34 AM »
great!  thank you sir!
Logged

Official Ninja

  • Full Member
  • ***
  • Posts: 131
Re: TG16 AV mod
« Reply #6 on: September 11, 2013, 07:03:19 AM »
Quote from: albatross on September 11, 2013, 05:53:34 AM
great!  thank you sir!

Hey, if you do it post pics. It's always interesting to see how mods turn out. Even simple ones.
Logged

albatross

  • Full Member
  • ***
  • Posts: 196
Re: TG16 AV mod
« Reply #7 on: September 11, 2013, 08:19:43 AM »
well i have one that was already started but im going to complete it and take pics for sure - hopefully it works when its done
Logged

HercTNT

  • Hero Member
  • *****
  • Posts: 1460
Re: TG16 AV mod
« Reply #8 on: September 11, 2013, 05:35:57 PM »
buy a tennoke bank 2. can get them for about $15 on ebay from time to time. av mod it and have battery backup to boot. just need to shave the connector with a hack saw blade and it will hug a us tg16 like a glove.
Logged
Pages: [1]
« previous next »