« previous next »
Pages: [1]

Author Topic: PCE Duo CD Problem  (Read 333 times)

Refia

  • Newbie
  • *
  • Posts: 5
PCE Duo CD Problem
« on: January 12, 2014, 11:01:59 AM »
I recently got a PC Engine Duo off Ebay for about 110 dollars and obviously for that price it needed some work, but it came with the controller, AC adapter, and video cables. It's missing the hucard cover, but I've been thinking about trying to mold one or something, it doesn't quite make me comfortable not having it there.

Anyway, I recently recapped the whole board, and it doesn't have any sound problems anymore, but I have a problem where the disc will only spin sometimes (very rarely) and I don't know what's different that makes it spin on occasion.

If it spins or doesn't spin, either way the CD Rom 2 screen just says "Please set disc!"

I put a new laser on it and changed all the caps, so i'm not sure if I did something to the ribbon cables or what but I checked continuity and it seems alright. No clue how i'd even replace those little ribbon cables though...

I do know both DC motors function though, in some capacity (setting the lens to the right causes the motor on top to retract the lens to the origin position, and the CD spinning means the other one at least works somewhat)

I somehow don't think the disc not spinning is a laser pot issue but i'm not sure.

Thought I'd ask you guys since there are a lot of helpful threads here on this stuff and I couldn't figure it out on my own so far. I haven't had a physical PC Engine in ages so I've never had to bother with repairing these things.

Thanks!
Logged

wyndcrosser

  • Full Member
  • ***
  • Posts: 227
Re: PCE Duo CD Problem
« Reply #1 on: January 12, 2014, 04:08:05 PM »
The screen says "set disc" no matter if it spins up or not? Did you remove the solder blob from the laser lens?
Logged

Refia

  • Newbie
  • *
  • Posts: 5
Re: PCE Duo CD Problem
« Reply #2 on: January 12, 2014, 04:28:47 PM »
Yeah, it says that either way, and the lens bangs the switch on the left whether there's a disc there or not before displaying it. I don't think I removed the blob from the lens, but i'm not sure exactly where that would be. The problem existed before I got it, but apparently it would spin discs, so i'm not sure.
Logged

Refia

  • Newbie
  • *
  • Posts: 5
Re: PCE Duo CD Problem
« Reply #3 on: January 12, 2014, 04:42:24 PM »
Here's a few pictures of the top gears, lens assembly, and ribbon cables.

EDIT: didn't realise how bad the pictures would end up compressing them to fit in the limits. Here's a link to an album with better quality ones. http://imgur.com/a/9ssSC
« Last Edit: January 12, 2014, 04:45:55 PM by Refia »
Logged

ApolloBoy

  • Sr. Member
  • ****
  • Posts: 477
Re: PCE Duo CD Problem
« Reply #4 on: January 13, 2014, 08:43:49 AM »
The solder blob should be on the ribbon cable of the new laser.
Logged
Quote from: Arkhan
it makes me laugh because people are like I REMEMBER PLAYIN THAT BACK IN THE DAY, MAN THAT WAS FUN.

and then I go "yeah I remember playing that 2 days ago because I still have my SNES, retard"

Refia

  • Newbie
  • *
  • Posts: 5
Re: PCE Duo CD Problem
« Reply #5 on: January 13, 2014, 04:51:31 PM »
If it's anything on the laser, it should still be there, since i just plopped it in. I can't find exactly where it is, but the laser itself is basically identical to my old one, so I think it's fine.
Logged

Keith Courage

  • Hero Member
  • *****
  • Posts: 2690
Re: PCE Duo CD Problem
« Reply #6 on: January 14, 2014, 05:18:02 AM »
There isn't any solder blob to worry about on a DUO lens. The solder blob is only on TG16 Black or pc engine white CD drives.
Logged

Refia

  • Newbie
  • *
  • Posts: 5
Re: PCE Duo CD Problem
« Reply #7 on: January 14, 2014, 06:46:44 AM »
Quote from: Keith Courage on January 14, 2014, 05:18:02 AM
There isn't any solder blob to worry about on a DUO lens. The solder blob is only on TG16 Black or pc engine white CD drives.
Good to know, I was looking for one desperately lol
Logged

wyndcrosser

  • Full Member
  • ***
  • Posts: 227
Re: PCE Duo CD Problem
« Reply #8 on: January 14, 2014, 12:06:41 PM »
haha okay, my bad. I thought there was were always ones on HOP lasers
Logged
Pages: [1]
« previous next »