Author Topic: Replaced screws in a DUO (Read 195 times)

grendelrt · « **on:** June 30, 2006, 09:01:23 AM »

Has anyone replaced the screws in a turbo duo. When I pulled out my security screws one of them was almost stripped, so I would like to put something in more convential. Maybe hex headed screws or something, anyone done this and know the size?

FM-77 · « **Reply #1 on:** June 30, 2006, 09:21:18 AM »

I replaced mine with some screws I took from an old Mega Drive II. Works great.

grahf · « **Reply #2 on:** June 30, 2006, 09:41:43 AM »

Yeah, i have a little bin container full of various plastic screws. I just used four decent philips head screws. I did the same with my Core Grafx, and a bunch of SNES carts.

grendelrt · « **Reply #3 on:** June 30, 2006, 10:23:31 AM »

Cool so they arent a special size then. I will have to take one up to lowes or something and get some matching screws.

grahf · « **Reply #4 on:** June 30, 2006, 11:16:19 AM »

Well your best bet it taking them from other electronics such as old vcrs, etc. Plastic screws are not very finicky, so you can go a tiny bit smaller or bigger if you need to. But try to find some the same size.