looking for pcb for nec turboxpress

[retro]

hi ,i have a nec turbo xpress ,but it was sent to repair for bad caps a long time but now is dead some components are missing, and only have black screen and cant even adjust the brightness ,so i made some research but for a lack of schematics or information i joined to this community hoping to find a used pcb board ,lcd is fine

thanks in advance and best regards from mexico

[MotherGunner]

Welcome to the forums.  Please start here (that whole section matter of fact) and go from there.

Good luck on getting your TE repaired. 

https://www.pcenginefx.com/forums/index.php?topic=5015.0

[retro]

thanks for your advice, but  the  unsuccesfull repair was done like 3 years ago ,now i have some soldering skills ,i replace all bad caps but some components are missing like one blue with a 150k ,i think is a inductor, but i replace with 220k and still nothing ,someone have info about this will be appreaciated
 

[thesteve]

show me what your missing and i will try to id it for you

[munchluxe63]

Here's a PC Engine service manual.


Near the end of the document are schematics and part lists. Hope this helps; this is for TG16, but it shouldn't be too different to the Turbo Express.