« previous next »
Pages: [1]

Author Topic: TE LCD pinout?  (Read 295 times)

wilykat

  • Hero Member
  • *****
  • Posts: 908
TE LCD pinout?
« on: June 25, 2015, 08:29:42 AM »
Anyone know of the LCD pinout?  Other LCD systems (Gameboy, Lynx, and Game Gear) had 20 or 30 lines between the board and the LCD, which suggest the LCD were directly controlled.  TE cable however is only 8 lines total.

Does it means TE LCD uses analog video such as RGB?
Logged

Black Tiger

  • Hero Member
  • *****
  • Posts: 11242
Re: TE LCD pinout?
« Reply #1 on: June 25, 2015, 09:26:59 AM »
There is a Mod/Repair section filled with this kind of info.
Logged
http://www.superpcenginegrafx.net/forum

Active and drama free PC Engine forum

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: TE LCD pinout?
« Reply #2 on: June 25, 2015, 12:57:00 PM »
i know i posted it somewhere......
its RGBS5(brt)(-24)(gnd)
dont recall the order
Logged

wilykat

  • Hero Member
  • *****
  • Posts: 908
Re: TE LCD pinout?
« Reply #3 on: July 01, 2015, 07:37:40 AM »
My Google-fu is failing me. I can't find such info.
Logged

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: TE LCD pinout?
« Reply #4 on: July 01, 2015, 11:51:20 PM »
Logged

wilykat

  • Hero Member
  • *****
  • Posts: 908
Re: TE LCD pinout?
« Reply #5 on: July 02, 2015, 05:41:06 AM »
No wonder I didn't find it.  Thanks!!  If only 3.5" LCD with RGB input were easy to find.  Maybe I'll fire up my old oscilloscope and see if there is composite to RGB separator on LCD and tap there?  Inverted sync seems odd though, I wonder if it can be in-inverted using something like 7404 or 4069 or if the composite sync is analog rather than digital?
Logged

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: TE LCD pinout?
« Reply #6 on: July 05, 2015, 12:33:32 AM »
its TTL inverted sync so yes a logic inverter works
the 3.5LCD board goes from composite to digital RGB, not analog so that wont work
Logged
Pages: [1]
« previous next »