Author Topic: Joystick Compatibility w/Supergrafx  (Read 595 times)

SavagePencil

  • Full Member
  • ***
  • Posts: 140
Joystick Compatibility w/Supergrafx
« on: January 26, 2018, 09:14:13 AM »
Are there any known incompatibilities with joysticks and the SuperGrafx?  My XE-1 HE Pro does not respond correctly on my SGX, but works fine on my Duo.  I thought it might be due to the built-in multi tap on the joystick but confirmed that a multi tap and two pads work fine on the SGX.

Button mappings appear off:  joystick commands are interpreted as Pause, all button inputs act like button 1, etc.  Same deal if I switch off the SGX switch.

Hori Fight Stick Multi works fine, but *only* in 2–button mode.

SavagePencil

  • Full Member
  • ***
  • Posts: 140
Re: Joystick Compatibility w/Supergrafx
« Reply #1 on: January 26, 2018, 10:31:30 AM »
Avenue 6 pad wigs out in 6-button mode but works fine in 2 button mode.

Using Chris Covell's Pad Test (I'm running on an Everdrive v2), I see that *any* non-DPad input results in all of the buttons getting pressed.  That is, if you press Select, it lights up Select, Run, I, and II.

This is not how it behaves when running on the Duo.

ccovell

  • Hero Member
  • *****
  • Posts: 2245
Re: Joystick Compatibility w/Supergrafx
« Reply #2 on: January 27, 2018, 12:23:57 PM »
This is interesting.  The SGX does have an extra parallel interface, so perhaps... somehow... it is creating conflicts with 6-button joy reading, etc?  I'll try the joypad test with my SGX when I have the time.

SavagePencil

  • Full Member
  • ***
  • Posts: 140
Re: Joystick Compatibility w/Supergrafx
« Reply #3 on: January 28, 2018, 01:14:11 AM »
I guess what I’m trying to narrow down here is:

Is this due to the Everdrive, the console, or the stick?

Is it unique to me, or is this something that affects everyone with this combo?

MobiusStripTech

  • Full Member
  • ***
  • Posts: 156
Re: Joystick Compatibility w/Supergrafx
« Reply #4 on: February 28, 2018, 08:23:38 AM »
I was able to solve this for SavagePencil. It was the controller port on the SuperGrafx. Pins 1 and 2, the Run and I buttons were shorting inside the connector. This was causing the system to read as all non-directional buttons were being pressed on the second controller poll, since the first poll only reads directional buttons.
For mod work and questions email us at mobiusstriptech@gmail.com

Twitter: @mobiusstriptech

Youtube: MobiusStripTech

Website: http://www.mobiusstriptechnologies.com/

exodus

  • Hero Member
  • *****
  • Posts: 868
Re: Joystick Compatibility w/Supergrafx
« Reply #5 on: February 28, 2018, 11:21:09 AM »
so it was a faulty system, and that's it?

SavagePencil

  • Full Member
  • ***
  • Posts: 140
Re: Joystick Compatibility w/Supergrafx
« Reply #6 on: February 28, 2018, 12:38:39 PM »
Faulty joystick port, but one that only evidenced itself with the 6-button or joystick with a multi-tap.  The standard joypad worked fine.

exodus

  • Hero Member
  • *****
  • Posts: 868
Re: Joystick Compatibility w/Supergrafx
« Reply #7 on: February 28, 2018, 04:50:34 PM »
weird! well, I'm glad it's not a consistent issue with the machine.

SignOfZeta

  • Hero Member
  • *****
  • Posts: 8497
Re: Joystick Compatibility w/Supergrafx
« Reply #8 on: March 01, 2018, 01:26:19 PM »
Wobbly PCE control ports can have some weird results.
« Last Edit: March 01, 2018, 02:07:06 PM by SignOfZeta »