Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Home
Help
Search
Login
Register
Welcome to PCEngineFans!
PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
»
NEC TG-16/TE/TurboDuo
»
TG/PCE Repair/Mod Discussion
»
Super Cdrom2 RGB mod
« previous
next »
Print
Pages: [
1
]
Author
Topic: Super Cdrom2 RGB mod (Read 564 times)
delucep
Newbie
Posts: 7
Super Cdrom2 RGB mod
«
on:
February 18, 2024, 10:56:51 AM »
Hi all,
Is there a thread on how to change the 5 pin din to an 8 pin with an rbg mod and amp, also so there a recommended supplier to get the components from?
Thanks!
Logged
Keith Courage
Hero Member
Posts: 2690
Re: Super Cdrom2 RGB mod
«
Reply #1 on:
February 29, 2024, 02:39:34 AM »
Pretty much the same as a DUO as far as the DIN 8 port is concerned. But then you need to tap the video signals from the Expansion port pins.
Here is a diagram of the expansion port pins.
Another thing of note is that the Din port on the super cd rom doesn't have 5V going to pin 4 like a DUO does. So you will have to solder a wire there and get 5V from somewhere. I just grab is straight from the 7805 voltage regulator but I'm sure there are other spots that can be used.
Logged
herr-g
Jr. Member
Posts: 93
Re: Super Cdrom2 RGB mod
«
Reply #2 on:
March 19, 2024, 09:17:57 AM »
There is an open solder jumper 'J1' on the PCB bottom near the DIN connector. If you bridge it, you have +5V on Pin4 as usual ^^
«
Last Edit: March 19, 2024, 09:24:19 AM by herr-g
»
Logged
delucep
Newbie
Posts: 7
Re: Super Cdrom2 RGB mod
«
Reply #3 on:
March 22, 2024, 11:57:23 AM »
Thanks both! The picture looks a bit dark to me, all the colours are correct but the brightness/contrast looks "wrong", if that makes sense - any suggestions? Thanks again!
Logged
herr-g
Jr. Member
Posts: 93
Re: Super Cdrom2 RGB mod
«
Reply #4 on:
March 24, 2024, 05:38:39 PM »
You have to add a RGB amp, as with all PCE RGB mods.
I've done my own THS7374 amp a while ago, based on Voultar's schematic (
Link
). You can download the gerbers and find some installation pictures incl. a SCDROM
«
Last Edit: March 24, 2024, 05:49:50 PM by herr-g
»
Logged
delucep
Newbie
Posts: 7
Re: Super Cdrom2 RGB mod
«
Reply #5 on:
March 27, 2024, 02:39:46 PM »
There?s an Rgbamp added. Rgb and 5v are all there, must be something I?m missing.
Thanks
Logged
Keith Courage
Hero Member
Posts: 2690
Re: Super Cdrom2 RGB mod
«
Reply #6 on:
March 30, 2024, 07:22:11 PM »
The RGB signals in all PC engine/turbo systems need to be amped. The signals are just not strong enough to be used straight to any TV or upscaler.
https://www.ebay.com/itm/126245283711?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=126245283711&targetid=1529493975022&device=c&mktype=pla&googleloc=9016213&poi=&campaignid=19851828444&mkgroupid=145880009174&rlsatarget=pla-1529493975022&abcId=9307249&merchantid=114729822&gad_source=1&gclid=Cj0KCQjw8J6wBhDXARIsAPo7QA-bw-Ih_A1UCGs1agHqMHFvtUUyayKdBoePDwL8UKfZqC1Z4r_zvjAaAjI6EALw_wcB
or
https://voultar.com/index.php?route=product/product&product_id=53
Logged
delucep
Newbie
Posts: 7
Re: Super Cdrom2 RGB mod
«
Reply #7 on:
April 11, 2024, 10:04:59 AM »
It was down to the retrotink, put it through the tv and it looks stunning and not dark at all.
Thanks for you help and info both, really appreciated.
Logged
Print
Pages: [
1
]
« previous
next »
PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
»
NEC TG-16/TE/TurboDuo
»
TG/PCE Repair/Mod Discussion
»
Super Cdrom2 RGB mod