Author Topic: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay  (Read 771 times)

Keranu

  • Hero Member
  • *****
  • Posts: 9054
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #15 on: October 05, 2007, 05:59:06 PM »
As I've stated several times before, I prefer the grey 6-button / RX pad over the Avenue 6 a lot more. Looks wise, Avenue 6 smokes it, but the grey pad is more comfortable and plays better for me, not to mention it has a sturdy end connector unlike my Avenue 6 which I have to plug in a special way. I just wish the grey pad had concave buttons like the Avenue 6.
Quote from: Bonknuts
Adding PCE console specific layer on top of that, makes for an interesting challenge (no, not a reference to Ys II).

grahf

  • Hero Member
  • *****
  • Posts: 880
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #16 on: October 05, 2007, 08:52:27 PM »
I own both a Hori Fighting Commander and a Duo-RX pad. I will say that the d-pad on the Hori pad is better, but I prefer the overall feel of the RX pad. Its super comfortable in your hands. I would go so far as to say its one of the most comfortable controller ever (for my hands at least), even comparing new gen stuff.

I generally either use the RX pad, or the avenue 3 (if i need easy access to run/select and turbo switches).

nat

  • Hero Member
  • *****
  • Posts: 7085
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #17 on: October 05, 2007, 09:20:29 PM »
I'll concede the RX/PC-FX pad is [extremely] comfortable to hold, but the D-Pad is a mess.

Keranu

  • Hero Member
  • *****
  • Posts: 9054
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #18 on: October 06, 2007, 12:05:13 PM »
The d-pad looks like a mess, but it works better for me. Personally I prefer a good old NGPC click stick over them all!  :mrgreen:
Quote from: Bonknuts
Adding PCE console specific layer on top of that, makes for an interesting challenge (no, not a reference to Ys II).

nat

  • Hero Member
  • *****
  • Posts: 7085
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #19 on: October 06, 2007, 01:01:29 PM »
The d-pad looks like a mess, but it works better for me. Personally I prefer a good old NGPC click stick over them all!  :mrgreen:

It's not that I think it looks like ass, it controls like ass because it's too f*cking stiff.

Keranu

  • Hero Member
  • *****
  • Posts: 9054
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #20 on: October 07, 2007, 03:14:10 PM »
It's not stiff at all for me, maybe you just need to use yours more (just like how I need to use my Turbo Express' d-pad more!).
Quote from: Bonknuts
Adding PCE console specific layer on top of that, makes for an interesting challenge (no, not a reference to Ys II).

Turbo D

  • Hero Member
  • *****
  • Posts: 3989
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #21 on: October 07, 2007, 04:12:29 PM »
Somethings get stiff when you use them more  :wink:

grahf

  • Hero Member
  • *****
  • Posts: 880
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #22 on: October 07, 2007, 04:15:49 PM »
Like you said Keranu, Its partially due to use. My one Express/GT had a stiff dpad, but the other one has a super soft pad. Also, I have one or two REALLY fresh coregrafx pads that are still super stiff. My avenue 3 pad is very soft.  Ive taken a lot of these apart, and they all have pretty much the same rubber contact pads (dont know about the RX). I think a lot just comes down to "breaking in" the controller. My RX pad (which i bough from another member here) is not really stiff at all. Its softer than my coregrafx pads.

nat

  • Hero Member
  • *****
  • Posts: 7085
Re: Pair of Arcade Pad 6 (Duo-RX) controllers on ebay
« Reply #23 on: October 07, 2007, 06:55:49 PM »
Keranu, do the D-Pads on your PC-FX controllers feel the same as the RX D-Pads? Because I have two FX pads and both have super-duper stiff D-Pads which is where I'm drawing the conclusion from.

They are by far the stiffest D-Pads out of the 30+ controllers I own for all my game systems. You could be right about needing to "break them in" but they just don't seem like they'll really loosen up all that much.