Author Topic: Switch on back of SuperGrafx for? (Read 1008 times)

monads · « **on:** September 01, 2004, 06:23:17 PM »

What is that small little switch for? It's either in the I or II position. Anyone know?

Pcenginefx · « **Reply #1 on:** September 03, 2004, 06:39:57 PM »

The switch on the back of the SuperGrafx selects either PC-Engine compatibility mode or native SuperGrafx mode. The switch was put there to support PC-Engine games that accessed the Video Display Controller in a certain fashion (I'm not sure how...I'm not THAT geeky

monads · « **Reply #2 on:** September 03, 2004, 07:01:40 PM »

So which position should it be in? Or does it even matter since I don't have that display controller? Currently it's set in the I position, and I can play SuperGrafx and PC engine games.

btw, congrats on your acquistion of terraforming.

Pcenginefx · « **Reply #3 on:** September 05, 2004, 11:35:33 AM »

Oh, the display controller is one of the chips inside of the unit...not an external device. I think you would only see a difference if you had a game that was PCE/SG compatible (there are a few of those), but as for what the switch should be at, either one should be fine unless you see some weird video distortion going on.

Nutribrain · « **Reply #4 on:** September 06, 2004, 02:24:10 AM »

If you own Darius Plus which is a SGX/PCE Hybrid cart, you could try the different positions. The difference between SGX and the PCE when running this game is that the sprites flicker way more on a PCE than a SGX, at least when you fight the level-boss.