Author Topic: Bad Capacitors? FM Towns Marty  (Read 450 times)

SuperDeadite

  • Hero Member
  • *****
  • Posts: 2096
Bad Capacitors? FM Towns Marty
« on: April 17, 2011, 09:02:09 PM »
So, I dug the old broken Marty out of the closet today.  It will not read CDs,
adjusting the laser pot (it only has one) does nothing.   So I finally took the whole
thing apart to look at the board (pain in the ass due to tons of shielding plates.

Only thing I could see are these caps.  The have black stuff on top that looks like
magic marker.  One swipe with a tissue wipes it off.  Are these caps bad?  I've seen
brown stuff from caps before, but nothing like this.

Stronger Than Your Average Deadite

incrediblehark

  • Hero Member
  • *****
  • Posts: 638
Re: Bad Capacitors? FM Towns Marty
« Reply #1 on: April 18, 2011, 12:08:23 AM »
interesting that the black stuff are straight lines, it does look a little like marker. I can open up mine and take a look.

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Bad Capacitors? FM Towns Marty
« Reply #2 on: April 18, 2011, 03:24:00 AM »
i have often seen old stock parts marked that way.
the pi isnt clear enough to tell is the caps are split on top (prevent) caps only.
 

SignOfZeta

  • Hero Member
  • *****
  • Posts: 8497
Re: Bad Capacitors? FM Towns Marty
« Reply #3 on: April 18, 2011, 05:11:00 AM »
Its just marker. Not an uncommon site.

chop5

  • Full Member
  • ***
  • Posts: 203
Re: Bad Capacitors? FM Towns Marty
« Reply #4 on: April 24, 2011, 04:59:15 PM »
the lasers dead,im working on a top secret project for new marty success. I have to be secretive now that there are spies everywhere,but if you lost all hope and desperate you can pm and il give you details.  :-$

yeah i seem to be the leading fm towns martyologist in the americas,il explain more if you pm me. :wink:
AKA jetblue
Gentlemen behold...The chopsado!
http://img.photobucket.com/albums/v238/jetbue7/prchopsado.jpg tg-16 region converter or some weird bow tie

incrediblehark

  • Hero Member
  • *****
  • Posts: 638
Re: Bad Capacitors? FM Towns Marty
« Reply #5 on: April 27, 2011, 01:36:08 AM »
the lasers dead,im working on a top secret project for new marty success. I have to be secretive now that there are spies everywhere,but if you lost all hope and desperate you can pm and il give you details.  :-$

yeah i seem to be the leading fm towns martyologist in the americas,il explain more if you pm me. :wink:

sounds interesting... I just recently got into the marty, trying to work with it and figure out some things here and there. there really isn't all that much info on the system. I hope your top secret project is some sort of attachable drive large enough to hold a ton of quality marty games :)

Also, I can confirm with SignOfZeta, its just marker on the caps. the ones i had with the same marker on my board were not part of the cd-rom board, so even if they do need to be replaced, I don't think it has to do with your cd not working. of course i could be completely wrong though.