« previous next »
Pages: [1]

Author Topic: turbografx controller to pce mod  (Read 247 times)

kakutolives

  • Full Member
  • ***
  • Posts: 198
turbografx controller to pce mod
« on: May 21, 2012, 05:11:07 PM »
so I recently got a mini din 8 pin socket. I want to solder the turbografx controller wires and install them to the mini din socket, so it works on a pce instead.
anybody tried this and if so anybody got a color guide which could tell me which color goes to which pin?

thanks.
« Last Edit: May 21, 2012, 05:15:55 PM by kakutolives »
Logged
Good Sellers (in my experience)
Samurai Ghost, Keith Courage, Bernie, tggodfrey, bartre (hoping to add more to this list soon)

People who are just plain Awesome:
BlueBMW (to this day i thank you for hooking me up with Sapphire and getting me started with collecting PCE games)

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: turbografx controller to pce mod
« Reply #1 on: May 21, 2012, 09:38:17 PM »
it's not too hard, check pinout on Gamesx.com and use an ohmmeter, you can figure out the existing wiring and then how you will adapte to PCE.
Logged
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

henrycsc

  • Hero Member
  • *****
  • Posts: 885
Re: turbografx controller to pce mod
« Reply #2 on: May 21, 2012, 11:00:44 PM »
A better solution might be to swap the cables of a Turbo Tap and a PCE Tap.  That way you have an extension and a converter that you can then use all your original controllers on the other system.

I'm sure there's a thread on how to do it.
Logged
Wanted:
Bootleg Hucards (Hong Kong, China)
Third Party Hardware (US, Japan, China, Europe, Korea)
Canadian Boxes and Manuals (French text)
Ton's of Trades available - just PM me.

GohanX

  • Hero Member
  • *****
  • Posts: 1140
Re: turbografx controller to pce mod
« Reply #3 on: May 22, 2012, 04:22:08 AM »
I've done that in reverse to use PCE controllers on a TG16, it's very nice.

Kakuto, an easier way of doing this is get a junk PCE pad and just swap the cables. The little wiring harness plugs right into the controller, no soldering required.
Logged
Pages: [1]
« previous next »