Author Topic: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release  (Read 15691 times)

esteban

  • Hero Member
  • *****
  • Posts: 24063
  |    | 

KnightWarrior

  • Hero Member
  • *****
  • Posts: 736
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #376 on: December 06, 2012, 02:46:38 PM »
Did you ask him if he give him the cut of the Deluxe Editions that are sold??

I won't buy from SAG for Flash Cart/Cards anyways

Why not just use a HuCard case?



It is a HuCard.


Now that's Sexy

NightWolve

  • Hero Member
  • *****
  • Posts: 5277
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #377 on: December 08, 2012, 02:37:27 AM »
$140 for some unnecessary crap? People are really stupid.

So....people are stupid, because they might like to get something that someone else feels is unnecessary?  Hmmm....

Well, guess I'm stupid then.  I just don't see how you feel I'm stupid because I choose to buy that package deal.  But what do I know....  :)


I'm kind of surprised at your reaction, Bernie. With all the information presented, you don't agree his price is highly questionable?? I wanted this version too, it looks great, and I waited to see what the price was gonna be, but $139.99 is a plain rip-off given what we know... I'd go as far as using outrageous... Little things have already annoyed me like krikzz pricing the regular one at $79.00 (the engineer that made it!) and this guy pricing it at $79.99 for that extra little dollar and playing that one-penny-less bullshit most US retailers play so as not to list a solid, even price ($80 in this case)... I f*cking hate that shit... He didn't spend the thousands of hours to design and build the thing, and he got to buy them in bulk, wholesale, much cheaper, but he deserves an extra dollar for some reason or so he thinks...

The other annoyance is that $8 charge for a cheap ass, 2GB microSD (class 4) card... I can get a 2GB for $3 bucks retail, so that's a shit price right there, but at least that's selectable and thus avoidable... For $7 bucks you can get a 4GB class 10 card (faster write speed 10MB/s) at a minimum... Twice the memory and TWICE the speed for his shit price, see a pattern here ?? (Problem with this point though is that krikzz is doing it also, but again, at least it's an optional purchase and in his case, he's the guy that sacrificed thousands of hours to create the thing - more forgivable.).

You aren't being exploited.  You have a choice.  Obviously some will choose to buy the naked board, and that's fine.  But some may like the look and not mind paying the extra for eye candy.  I just happen to be one of them.  I'd rather just pay someone else to make it look all pretty, than attempt to do it myself.  :)


Yeah, he has the choice to set his price, and the public has a choice to buy from him or not, but the public also has the choice to criticize (or praise) his "pricing" as is being done here! I hope he IS catching some shit for that price and it's not all clapping seals just patting him on the back, telling him what a great deal it is!

You've taken part in the Gouging thread where profiteering/greed/gouging is criticized all the time, you don't see that here with this guy ?? Not gouging, but definitely greed/profiteering ?

No, people are stupid if they think it's reasonable to spend $60 on paper, plastic and a sticker.


Nail on the head, that's pretty much all he did and raised the price of the product by f*cking 76%! f*ck this guy! You think of the thousands of hours krikzz spent as a hardware and software engineer to make this flash cart possible, the best and only one you'll ever need, and this guy comes along with nothing more than an appearance tweak, a case, a manual, etc. and asks for a ridiculous markup like he did some serious heavy lifting which is nowhere near as comparable to what krikzz had to go through to create the thing or ever could be!!!! f*ck this guy! I was hoping for a total price of maybe around $100 or something (max, maybe $110 barely), but hell no, he's not getting my money; I'm gonna settle on the plain one and I think I might use some hot glue to coat it with for protection. I wonder if hot glue sticks come in black, all I got is standard transparent ones. That would work nice.

http://stoneagegamer.com/turboeverdrive_deluxe.aspx
Quote
Turbo EverDrive Cart (rev. 1.1)
Individually Numbered
Coated in clear conformal coat and black epoxy enamel to prevent dust, moisture and static shock
Semi-transprent smoke black shell
Color label
Held together with 4 gold plated screws


I mean, what the f*ck ? Gold-plated ? WHY ? Something wrong with plain ole brass ?? They're just f*cking screws!! Oh right, we can charge more noting that they're plated with gold for the "serious" gamer out there... A flashcart in Gangnam Style right here (that whacky song is partly a criticism of the excesses of the wealthy). Heh. That's not even a positive when you're dealing with RCA jacks and cables because plain ole copper is the better, cheaper conductor, while silver is the best, though not as cheap as copper. I dunno why they do it, maybe because it takes longer for it to tarnish or something... Anyway, wow, gold-plated screws... I would not have thought of that...

*shakes fist*

Screw this guy!!! ;)



FIRMWARE PATCH

EDIT: Well, I had been concerned about this firmware coupon bullshit of his, but I just learned that firmware upgrades are as simple as downloading a file called "tos.pce" from krikzz's website, copying it to your microSD card, plugging it back into the flashcart, and loading tos.pce from the boot menu like a regular ROM file. One year coupon bullshit or not from SAG, that's how you do it in this case! And there is a patch you'll need if you wanna fix a problem that prevents like more than two pages or more of ROM files from appearing due to a bug in the FAT32 code. If you have hundreds of ROM files, after 2 pages in the menu, they won't show up without this patch or so:

http://krikzz.com/pub/support/index.php?dir=turbo-ed%2Fos%2Fv2

Reference: http://krikzz.com/forum/index.php?topic=41.msg387#msg387

In trying to understand where this coupon business originated from, basically, you had to send the unit back to him to let him do the upgrade because of special hardware requirements in the case of the EverDrive64.

http://stoneagegamer.com/everdrive64_firmware_update.aspx

Doing it yourself required you to have the following: Altera USB Blaster (whatever that is), a 10-pin header (???), Altera Quartus II software, and a Nintendo 64... krikzz obviously got a little better in his methods for patching/upgrading the firmware/OS so having to send the flashcart back to SAG and hoping your coupon didn't expire (resulting in having to pay him to do it) is not a concern with most any other krikzz flashcart... Anyhow, in SAG's defense, when it comes to the EverDrive64, that makes sense, you gotta ship it to him, he does it, and he has to pay to ship it back to you, etc. But why the coupon business for the other carts with no special hardware and software requirements for the upgrade ? For those that are complete idiots ?? For the Turbo EverDrive, the process is the same as saving a ROM file to your microSD, which you gotta learn how to do to even use the damn thing... =\ In general, it strikes me as not being in his interest to clearly inform you of how simple it is to do it yourself because rather than mentioning "firmware upgrade voucher" it should just say to check krikzz's support section for an upgrade file if available, etc....
« Last Edit: December 08, 2012, 07:14:17 AM by NightWolve »

Corredor X

  • Jr. Member
  • **
  • Posts: 77
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #378 on: January 18, 2013, 06:50:07 AM »
I want to buy a Turbo Everdrive, but I'm a little afraid of it not working on my PCE because of the +5v voltage issue... Is there a way to know if a certain mod on a certain system will have issues? I have a white PCE with both RGB and region mod, which are very similar to the ones on the mmmonkey site. Does anyone known if I could run into problems with it?

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #379 on: January 18, 2013, 01:59:45 PM »
this cart is solid, it's not as touchy as some of the older carts
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

jperryss

  • Hero Member
  • *****
  • Posts: 1176
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #380 on: January 18, 2013, 03:11:30 PM »
Thanks for bumping the thread and reminding me that I wanted to order one of these.   :mrgreen:

SamIAm

  • Hero Member
  • *****
  • Posts: 1835
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #381 on: March 14, 2013, 01:16:05 AM »
It's tempting to make a new thread, but I'll post in here for now.

Does anyone have a Turbo Everdrive and a Supergrafx? If you do, please load up Aldynes and let it run its demo cycle for a couple of hours. I'd like to know if it freezes on you.

I just got my everdrive and I've been testing it a lot, and I am inclined to think that Aldynes has either never been properly dumped or is incompatible with the everdrive. It freezes on me very frequently.

I know the problem is not my Supergrafx, because it plays every hucard I have with no trouble. I also have an original Aldynes hucard and it works just fine.

I know it's probably not the everdrive, because it plays every other game fine, including Daimakaimura and 1941 (also 1MB Supergrafx games), and others like Bonk 3 and Street Fighter 2.

I'm pretty sure it's not my particular ROM, because I've done some downloading from multiple sources and compared the checksums. I've also formatted my SD card and all that jazz.

It's alarming to see that there are five [ b ] versions of the ROM in the Goodset. [ b ] means it's a verified bad dump. Then there's the one version that has no marking - who's to say that that one came out all right? It works in an emulator, but that's not the best indicator.

I'm going to test the [ b ] roms just in case, but if someone else could check the basic version, that would be great.  :)
« Last Edit: March 14, 2013, 03:07:14 PM by SamIAm »

SamIAm

  • Hero Member
  • *****
  • Posts: 1835
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #382 on: March 14, 2013, 03:25:07 PM »
All of the [ b ] versions are officially borked (which is not surprising, because they are labelled as bad dumps).

If anyone else could test the plain, non-[ b ] version of the Aldynes rom on their actual console, that would be great.

How are Hucards usually dumped, anyway?

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #383 on: April 04, 2013, 03:39:26 AM »
I want to buy a Turbo Everdrive, but I'm a little afraid of it not working on my PCE because of the +5v voltage issue... Is there a way to know if a certain mod on a certain system will have issues? I have a white PCE with both RGB and region mod, which are very similar to the ones on the mmmonkey site. Does anyone known if I could run into problems with it?


I just region modded my pce and now the everdrive does't load the games where else it did before. It's just the load or write in process is where it is not working. I have a region moded tg16 where it loads fine. When I put the everdrive in my pce/ifu combo and hit select to bring the last game loaded, it plays fine.
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #384 on: April 19, 2013, 03:52:01 PM »
FYI - updated the cover for the custom DS case I am using for this:



Quote
From the makers of such hits like Mega Everdrive and Super Everdrive comes the most amazing, axe swinging, dinosaur bonking, awesome true-color animation product ever released for the TurboGrafx16! POWER UP this amazing card and get that awesome "arcade feel" over and over again! It's so powerful the evil forces of FEKA cannot help but to OBEY!

"I Obeyd time and time again!" - Johnny Turbo
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

Joe Redifer

  • Hero Member
  • *****
  • Posts: 8178
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #385 on: April 21, 2013, 07:37:40 AM »
TurboG?

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #386 on: April 21, 2013, 08:21:51 AM »
At first I didn't understand no that's the watermark doing that it darkened the bottom portion of the graphic
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #387 on: May 21, 2013, 06:01:01 PM »
This is pretty nice....somehow I missed this 3D print project


If we ever get enough interest for a Turbo ED order I wouldnt mind making a custom label for that.
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

Bernie

  • Hero Member
  • *****
  • Posts: 4271
    • Facebook URL
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #388 on: May 22, 2013, 03:45:16 AM »
This is pretty nice....somehow I missed this 3D print project


If we ever get enough interest for a Turbo ED order I wouldnt mind making a custom label for that.


Whoa!  Where can I get one those slip thingies?  That looks great!

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: Turbo Everdrive PC Engine / Turbografx 16 Flash Card Nearing Release
« Reply #389 on: May 22, 2013, 04:03:40 AM »



Screw version
http://www.shapeways.com/model/794552/0ac32996c160cc877455b7f81385cec8?li=shortUrl

Peg version
http://www.shapeways.com/model/824005/shell-v3-rev-a.html?li=shortUrl&key=a6adf254ca9a748a4636254bbeb46a6f


 this company does the 3D print service, this was developed by Buffallowing. A custom label can be created and placed on the top.





« Last Edit: May 22, 2013, 04:14:30 AM by Duo_R »
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq