Author Topic: TG 16 power switch very hard to turn on  (Read 301 times)

Xray

  • Full Member
  • ***
  • Posts: 162
TG 16 power switch very hard to turn on
« on: August 19, 2012, 01:05:40 PM »
Took my Turbo up to camp again this weekend, and the power switch was next to impossible to turn on. Had to use a butter knife to sort of wedge it on ,,, Turns off easily enough.
Seems to be clearing the cards well enough, anyone had this problem before.

MottZilla

  • Full Member
  • ***
  • Posts: 192
Re: TG 16 power switch very hard to turn on
« Reply #1 on: August 19, 2012, 01:58:22 PM »
Open it and see what is in the way. Maybe some piece of plastic or something is in the way. You probably don't want to keep forcing the power switch over if you don't know what is causing the resistance.

esteban

  • Hero Member
  • *****
  • Posts: 24063
Re: TG 16 power switch very hard to turn on
« Reply #2 on: August 20, 2012, 05:20:35 AM »
MottZilla is correct: you don't want to force the switch.

In my experience, dried yogurt/custard/flan is often the culprit.
  |    | 

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21366
Re: TG 16 power switch very hard to turn on
« Reply #3 on: August 20, 2012, 06:20:19 AM »
In my experience, dried yogurt/custard/flan is often the culprit.


Dang, the Cook is a messy eater. 
U.S. Collection: 97% complete    155/159 titles

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: TG 16 power switch very hard to turn on
« Reply #4 on: August 20, 2012, 07:35:17 AM »
i have seen this
the switch itself will jam
there is a detent ball on a spring in the switch.
it dropps into a few holes in the back of the switch frame.
a drop of oil on the ball will fix it. (add oil to holes in back of switch (just a drop))

KnightWarrior

  • Hero Member
  • *****
  • Posts: 736
Re: TG 16 power switch very hard to turn on
« Reply #5 on: August 20, 2012, 07:37:24 AM »
Just clean it

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: TG 16 power switch very hard to turn on
« Reply #6 on: August 20, 2012, 07:43:20 AM »
clean it first

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: TG 16 power switch very hard to turn on
« Reply #7 on: August 20, 2012, 07:45:24 AM »
the oil issue was mostly seen on boards that have been washed

Xray

  • Full Member
  • ***
  • Posts: 162
Re: TG 16 power switch very hard to turn on
« Reply #8 on: August 20, 2012, 08:39:16 AM »
Taking it apart would be the obvious thing to do, I thought maybe this is a common problem, as I recall this happening before with a different unit.
Never popped a turbo open, I have a security bit set that hopefully will have the right bit, or maybe I can fashion my own [I did that with a game cube].

thesteve, are you saying to oil the switch frame with the unit apart ?

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: TG 16 power switch very hard to turn on
« Reply #9 on: August 20, 2012, 10:06:13 AM »
yes
the oil goes inside the metal frame of the switch, where the detent ball rides.
look closely at the switch, with the unit apart to see what im talking about

esteban

  • Hero Member
  • *****
  • Posts: 24063
Re: TG 16 power switch very hard to turn on
« Reply #10 on: August 21, 2012, 10:02:46 PM »
Xray, during the initial cleaning, a toothpick soaked in a solution (60% hydrogen peroxide/10% Witch-hazel/30% Maraschino cherry) works wonders in dislodging gummy/crusty flan/yogurt/custard.



In my experience, dried yogurt/custard/flan is often the culprit.


Dang, the Cook is a messy eater. 


Seriously.
 
  |    |