Author Topic: Turbo/PCE/Genesis/SNES RGB to Component Video (YPbPr) Mod Chip Now For Sale!!!  (Read 5886 times)

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Thank you for chiming in Conhuevos:)


Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

Platinumfungi

  • Sr. Member
  • ****
  • Posts: 260
Just wanted to say awesome work  8) I haven't been here on the forum in ages, so it's great to see everyone is still rocking the scene and developing newer and better gear.

Keep it up!

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Thanks Red. The result was a collaboration between several of us. Wouldn't have been possible without all the valuable resources we have here. Btw, welcome back:)


Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

technozombie

  • Hero Member
  • *****
  • Posts: 730
Is there anyone out there who would like to create an install guide for the Genesis & SNES for me in exchange for free component video boards?


Sent from my iPhone using Tapatalk

I wouldn't mind doing this but I would need a guide to show me how to do it so I could make a guide...........

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Turbo/PCE/Genesis/SNES RGB to Component Video (YPbPr) Mod Chip Now For Sale!!!
« Reply #94 on: November 19, 2013, 02:48:17 PM »
You can tap rgb, sync and 5V directly from the genesis and SNES a/v port.

Genesis:



SNES:


Or you can tap from the encoder chip, don't know the part number for them at the moment.


Sent from my iPhone using Tapatalk
« Last Edit: November 19, 2013, 02:50:13 PM by turbokon »
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

technozombie

  • Hero Member
  • *****
  • Posts: 730
I'm going to order one of these from you on Friday,I've already spent my mad money for this pay period lol.

technozombie

  • Hero Member
  • *****
  • Posts: 730
Ok order placed, I'm a newb at this but I'm going to try to make a guide. I choose the Snes/Gen option, does that mean it will come with the 1k resistors?

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Yep, it does. It will soldered onto the board for you. I will send you two so that you can do it for the genesis and SNES. Do you need parts? Like wires, RCA jacks?


Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

technozombie

  • Hero Member
  • *****
  • Posts: 730
I don't have any wires, I was going to try to scavenge some or hit up radio shack. I placed an order last night on digikey for some RCA jacks and some oscillators to over clock the genesis later :)


Wow, thanks for sending 2, I hope the guide turns out well I'm going to try to take a ton of pictures and make my wife help me.

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Techno, the boards went out to you yesterday.


Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

technozombie

  • Hero Member
  • *****
  • Posts: 730
Awesome, yesterday I took my project Genesis apart and start taking some pictures. I'm looking forward to putting this together.

technozombie

  • Hero Member
  • *****
  • Posts: 730
Do you know where I can find a labeled pic of the Genesis encoder like the one of the SNES? Everything I find online is just the pic you posted since most people out there have been using RGB cables then going through a component converter. 

On a side note does anyone know where to purchase the male SNES multi plug?
A lot of websites recommend these rgb scart cables, they have to get the plugs from somewhere.
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=200948949594

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Here is the genesis model 1 encoder where I tapped rgb & sync from.




Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

Zenimus

  • Newbie
  • *
  • Posts: 8
Just wanted to say, the component video quality on my Turbo Duo is spectacular! I'm using an XRGB Framemeister, and with Turbokon's board, the pixels are perfectly sharp.

Excellent work!

technozombie

  • Hero Member
  • *****
  • Posts: 730
Well I'm close to being finished but I'm having a problem


Hopefully the picture works, there is a some purple lines coming off of anything white, all other colors look good. Any ideas?

Once I get this solved I'm going to put together a guide for the Genesis, I've been taking a bunch of pictures.

https://drive.google.com/file/d/0BzgVE6j9OyMTQTQyeU1jSFlxU0pKUzlZUFloaW1VbmpZMF93/edit?usp=sharing
« Last Edit: December 01, 2013, 05:32:54 AM by technozombie »