Author Topic: Valis III manual misprint  (Read 505 times)

Lochlan

  • Sr. Member
  • ****
  • Posts: 408
Valis III manual misprint
« on: October 20, 2013, 11:36:46 PM »
Has anybody seen this before?

I will update later with pics, but basically the manual is cut wrong--you can see the bottom of another Valis III cover at the top of this one.  The miscut isn't huge, less than a cm.

Just wondering if this was common, I have another copy that doesn't have it and I don't think I've seen another one miscut like this--but obviously the ones above and below it on the print sheet are miscut as well, lol.
I'm not sorry about this, as I'm not sorry about ANY attack by the goverrats.

tggodfrey

  • Hero Member
  • *****
  • Posts: 1117
Re: Valis III manual misprint
« Reply #1 on: October 21, 2013, 02:59:03 AM »
Are you sure its not a copy?
Games currently in play:
PS3: COD Ghosts
TG16: Boxyboy

DragonmasterDan

  • Hero Member
  • *****
  • Posts: 3508
Re: Valis III manual misprint
« Reply #2 on: October 21, 2013, 03:59:19 AM »
mine has a misprint, there's a drawing of a man in drag on the cover rather than anything that looks like Yuko.


« Last Edit: October 21, 2013, 04:08:41 AM by DragonmasterDan »
--DragonmasterDan

FiftyQuid

  • Hero Member
  • *****
  • Posts: 1881
Re: Valis III manual misprint
« Reply #3 on: October 21, 2013, 05:04:57 AM »
mine has a misprint, there's a drawing of a man in drag on the cover rather than anything that looks like Yuko.




LOL.  Made my day.  :)
I'm busy playing pinball, but I still drop by to visit.

MotherGunner

  • Hero Member
  • *****
  • Posts: 2991
Re: Valis III manual misprint
« Reply #4 on: October 21, 2013, 05:34:17 AM »
She looks like Chyna.  Ha ha!
-MG

SI VIS PACEM, PARA BELLUM (If you want peace, Prepare for war)
SI VIS BELLUM, PARA MATRIMONIUM (If you want war, Prepare for marriage)

Xak

  • Hero Member
  • *****
  • Posts: 720
Re: Valis III manual misprint
« Reply #5 on: October 21, 2013, 05:35:51 AM »
^No Chyna I would actually do
Im a real life Sadler, just take me to the nearest item shop.

I have aspergers, and am a recovering Tonicholic

Lochlan

  • Sr. Member
  • ****
  • Posts: 408
Re: Valis III manual misprint
« Reply #6 on: October 21, 2013, 09:31:53 AM »
lol... this thread cracks me up.

You have a very peculiar sense of humor!

As for misprints such as Lochlan has, I would personally post it on e-bay for an exorbitant amount of money under the justification that, as with coins and baseball cards, errors are a rare and highly sought attribute for such collectables.

Ah, I see.  So you're assuming this is a prelude to me posting this on eBay because OMG RAREZ?

To answer your implicit charge, I have no immediate plans to eBay this thing as a rarity.  I was just curious about this since I've never seen it before.  As you correctly suggested, it is an extremely common practice with other collectibles to value these sorts of misprints higher.  I never used to be sensitive to that sort of thing, then I started playing Magic: the Gathering and was exposed to a marketplace that put a huge premium on misprints.  I understand that you and many other people on this forum are eager to demonize those whom you suspect would exploit ("gouge") the Turbo marketplace, but I really don't see any need to answer my simple inquiry with snark.   I also find it a strange reason to get upset--there really isn't much left to talk about when it comes to these games, a new topic doesn't seem like the worst thing in the world!  Furthermore I actually don't see anything wrong with valuing a collectible higher because of factory errors (after all, we are in a marketplace where games are valued significantly higher because of paper garbage, e.g. obis and outer cardboard boxes), but that's neither here nor there.

For whatever it's worth, you may joke, but I would not be surprised if somebody would in fact want your offset-error manual!

Anyway, I will post pictures of this later today for those who are curious!  I think misprints such as this are kind of cool, myself!
I'm not sorry about this, as I'm not sorry about ANY attack by the goverrats.

Lochlan

  • Sr. Member
  • ****
  • Posts: 408
Re: Valis III manual misprint
« Reply #7 on: October 21, 2013, 10:25:51 AM »
Argh, sorry.  I'm the one who should apologize, I jumped to conclusions.

Your manual is definitely cool BTW.
I'm not sorry about this, as I'm not sorry about ANY attack by the goverrats.

esteban

  • Hero Member
  • *****
  • Posts: 24063
Re: Valis III manual misprint
« Reply #8 on: October 21, 2013, 06:42:57 PM »
mine has a misprint, there's a drawing of a man in drag on the cover rather than anything that looks like Yuko.




LOL.  Made my day.  :)


She looks like Chyna.  Ha ha!


^No Chyna I would actually do


Hilarious!

I mentioned in the other thread (about good/bad cover art) that Valis III (North America) looks like a TRANNY SANDRA BULLOCK IMPERSONATOR who is cosplaying at San Diego Comic-Con.
  |    | 

Lochlan

  • Sr. Member
  • ****
  • Posts: 408
Re: Valis III manual misprint
« Reply #9 on: October 21, 2013, 06:57:43 PM »
OK well having thoroughly made an ass of myself already, I will not fail to deliver on the photos.

GAZE upon the wonders of the rarest Valis III ever!

http://i743.photobucket.com/albums/xx76/lochlanpm/valis-iii-miscut_2jpg21_zps88c06a0c.jpg


http://i743.photobucket.com/albums/xx76/lochlanpm/valis-iii-miscut_1_zpsd445fb23.jpg


I'm assuming if this was a common misprint I would have heard as much.  I guess I'll hang onto this for now, and perhaps register the domain misprintgameheaven.com in the hopes of convincing some rubes that this is worth a fortune!
I'm not sorry about this, as I'm not sorry about ANY attack by the goverrats.

TR0N

  • Hero Member
  • *****
  • Posts: 6421
Re: Valis III manual misprint
« Reply #10 on: October 21, 2013, 07:03:39 PM »
mine has a misprint, there's a drawing of a man in drag on the cover rather than anything that looks like Yuko.




Yuko is no xena warrior princess that's for sure  :roll:
« Last Edit: October 21, 2013, 07:09:14 PM by TR0N »

PSN:MrNeoGeo
Wii U:Progearspec

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21355
Re: Valis III manual misprint
« Reply #11 on: October 22, 2013, 03:49:16 AM »
I checked mine last night and found that while it is cut properly it has multiple misprints on the back.  Damn those errant apostrophes!
U.S. Collection: 97% complete    155/159 titles

DragonmasterDan

  • Hero Member
  • *****
  • Posts: 3508
Re: Valis III manual misprint
« Reply #12 on: October 22, 2013, 05:46:29 AM »
Wild... looks like not only is the cut not properly v-aligned, but that manual appears to be taller than the other one.  Is that an illusion of the photo, or did someone in the game manual page cutting department get the wrong dimensions?  if the latter is the case, then this issue would be progressively worse as the end of the print was reached.  I wonder how bad it got before QA noticed!

All it takes is the master sheets to be misaligned a little bit when cut and you have these problems. I suspect "close enough" was acceptable. Also, you're talking about QA from a company that approved that cover :-D
--DragonmasterDan

SuperPlay

  • Hero Member
  • *****
  • Posts: 1659
Re: Valis III manual misprint
« Reply #13 on: October 22, 2013, 07:00:26 AM »
mine has a misprint, there's a drawing of a man in drag on the cover rather than anything that looks like Yuko.


Can not stop laughing at this post :-)

pixeljunkie

  • Hero Member
  • *****
  • Posts: 673
Re: Valis III manual misprint
« Reply #14 on: October 22, 2013, 07:59:24 AM »
errors in printing and cutting are not uncommon. especially if they used cheaper vendors.