Author Topic: PC Genjin 3 (Bonk 3) not working on region modded TE  (Read 772 times)

schweaty

  • Hero Member
  • *****
  • Posts: 819
PC Genjin 3 (Bonk 3) not working on region modded TE
« on: November 29, 2013, 11:22:16 PM »
Bit of a head scratcher here, gents.  I region modded my Turbo Express  last weekend (thanks Turbokon).  It plays all my other PCE games just fine (Street Fighter II, Valkyrie Densetsu, PC Denjin), but when I put in PC Genjin 3 I get the 'no game inserted' white screen.  The HuCard is pristine and the contacts look good.

Only thing I can think of is that Bonk 3 requires a 'higher powered' system than just a standard TG.  I couldn't find anything on the internet that says that.  Just speculating.  Any thoughts? 
« Last Edit: November 30, 2013, 12:04:02 AM by schweaty »

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #1 on: November 30, 2013, 02:01:38 AM »
Do you have a pce system to test the bonk 3 with? I know the everdrive and flash card won't boot on some region modded systems.


Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

schweaty

  • Hero Member
  • *****
  • Posts: 819
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #2 on: November 30, 2013, 04:40:37 AM »
unfortunately, no... so, it could be the card, but like i said, it looks great

ClodBuster

  • Hero Member
  • *****
  • Posts: 2242
  • A real powerhouse!
    • Cumonreprocarts.com
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #3 on: December 01, 2013, 08:35:06 AM »
Have you already tried cleaning the cartridge contacts using alcohol? Even if they are looking fine, there could be some transparent layer of dirt on them. You can also try to clean the cartridge slot of your Turbo Express.

They tried to make me do a recap
I said no, no, no

schweaty

  • Hero Member
  • *****
  • Posts: 819
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #4 on: December 01, 2013, 09:43:24 AM »
yup.  tried that.  I even hit it with the plastic eraser.  no dice (its real clean now tho).

I literally checked every single game I have to see if the same thing would happen to any other game after the mod.  They all work.  I'm starting to think its a bad card even tho the guy I bought it from said it was tested.

I'm thinking the only way to confirm it is to check it in a real PC Engine (which I don't have or know anyone who does).

schweaty

  • Hero Member
  • *****
  • Posts: 819
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #5 on: December 02, 2013, 07:32:17 AM »
Alrighty.  The only way I'm going to know for sure if its the card or my TE is if some gracious soul among you would let me mail them the game to test it in a PC Engine.  Of course, I would pay for shipping both ways.

I would prefer it was a PCE GT because I figure that's the closest thing hardware-wise to a modded TE.  After that, an original white PC Engine would be my second choice.  I would prefer it were NOT a SuperGrafx or DUO (if possible).  I know I'm starting to sound picky here but I will be asking for my money back if it doesnt work so I want to make the test as "valid" as possible for the seller.

Before everyone raises their hand, you should know that I'm in the Air Force stationed in Germany.  The postage to an APO address is the same as it is in the states (which I am paying for.. friendly reminder) but it does require a Customs Statement (which is free) which can only be filled out an a Post Office.  So, to mail it back, you will have to go to a Post Office.

Hit me up if you can help a bruva out. 

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21366
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #6 on: December 02, 2013, 08:22:59 AM »
If it works in anything the problem is likely with your GT and not the card.  I don't have a GT, but I do have a TE and region converter card, a Turbo Duo, a Duo RX, and a CG II briefcase that I can try it in if nobody else offers.
U.S. Collection: 97% complete    155/159 titles

turbokon

  • Hero Member
  • *****
  • Posts: 2181
PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #7 on: December 02, 2013, 09:02:55 AM »
You can send it to me, I have all the systems you mentioned and almost everything in between ;)

I had someone sent me a dead salamander hucard that looked perfect.


Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

PunkicCyborg

  • Hero Member
  • *****
  • Posts: 3714
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #8 on: December 02, 2013, 03:07:29 PM »
I know member whisper2053  is also stationed in Germany
(19:28:25) GE0: superdead told me in whisper that his favorite game is mario paint

schweaty

  • Hero Member
  • *****
  • Posts: 819
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #9 on: December 03, 2013, 03:42:16 AM »
thanks for the responses guys!  I will hit up whisper2053 and see if he is still here.  If not, turbokon can expect some more crap in the mail (like he doesn't get enough already)

whisper2053

  • Sr. Member
  • ****
  • Posts: 413
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #10 on: December 03, 2013, 03:55:38 AM »
Still here bud! Email replied to :)

schweaty

  • Hero Member
  • *****
  • Posts: 819
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #11 on: December 03, 2013, 06:35:04 AM »
Looks like whisper2053 is going to hook it up... he's only about 30 min away.  thanks for all the responses and offers to help!
« Last Edit: December 03, 2013, 06:36:48 AM by schweaty »

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21366
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #12 on: December 03, 2013, 07:08:56 AM »
Meet up and play it together!  :mrgreen:
U.S. Collection: 97% complete    155/159 titles

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #13 on: December 04, 2013, 03:35:28 PM »

Looks like whisper2053 is going to hook it up... he's only about 30 min away.  thanks for all the responses and offers to help!


That's awesome to have a fellow obeyer that close by.


Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

whisper2053

  • Sr. Member
  • ****
  • Posts: 413
Re: PC Genjin 3 (Bonk 3) not working on region modded TE
« Reply #14 on: December 04, 2013, 05:17:49 PM »
Lol, we're trying to figure out directions...military bases in foreign countries aren't exactly conducive to gps directions :P