Supergrafx

[wildo2ne]

does anyone know if a tg16 power supply will work on a supergrafx?

[bob]

I will if you try it and let me know.

[wildo2ne]

sorry don't understand what you are saying

[Necromancer]

Galam channeled regal on that one. 

[Xak]

wow u guys are so unhelpful. Sorry i dont know if it will work. i know an NES power adapter works on a tubrografx 16 if that helps

Nevermind now that i think of it i think i used the RF switch.

[esteban]

I will wait to see what galam says.

[Tatsujin]

SGFX uses the PAD-113
DC 9V 800mA
Center plug negative.




TG16 uses..
DC 10.5V 730mA
Center plug negative.

as long the plug fits it should work, altough in a slight risky condition, since the voltage is higher (-> will produce a bit more heat at the internal 7805) and the amperage is slightly to low (in the specification only), I dont think the SGFX sucks fully 800mA.

please also confirm the TG16 specs with yours, since I have those information from the internet and never saw one in person.

[ccovell]

i know an NES power adapter works on a tubrografx 16 if that helps

Don't do this, as the NES adaptor outputs 9V AC, while the TGX needs DC.  You could potentially damage your TGX!

[bob]

Galam channeled regal on that one. 

HEY!

[Tatsujin]

wow u guys are so unhelpful. Sorry i dont know if it will work. i know an NES power adapter works on a tubrografx 16 if that helps

Nevermind now that i think of it i think i used the RF switch.

yeah better dont help at all than telling some fair tales out of the blue that might risk the life of his poor system.

[wildo2ne]

looking online I did get an answer, the supergrafx uses a 9v 800ma whiile the tg16 uses a 10v

[wildo2ne]

guess I won that supergrafx, meant to do a bid increase to 185 and accidentally did 1185.00 total bill was 340.00

[Tatsujin]

look what I wrote above wildo

[blotter12]

guess I won that supergrafx, meant to do a bid increase to 185 and accidentally did 1185.00 total bill was 340.00

Haha, congratulations! I guess $185 wouldn't have been enough anyway.

[xelement5x]

wow u guys are so unhelpful. Sorry i dont know if it will work. i know an NES power adapter works on a tubrografx 16 if that helps

Nevermind now that i think of it i think i used the RF switch.

I've learned now that I should never listen to you about anything. 

An official NES power adapter is a beast of a power supply that outputs in AC and will fry just about any other console it would be used on.  I can't count the number of busted Sega CDs I've seen because someone tried to use a NES supply on it.  Thankfully they have a fuse which can be replaced though.