« previous next »
Pages: [1]

Author Topic: Supergrafx White Screen  (Read 225 times)

wildo2ne

  • Jr. Member
  • **
  • Posts: 99
Supergrafx White Screen
« on: January 28, 2014, 08:38:03 AM »
Guys I am getting a white screen on boot up while using my supergrafx and no game loads. I have cleaned the cartridge slot but does not work. I looked over the board today and to me it looks like one of the pins is being grounded. could you guys take a look and let me know what you think

https://imageshack.com/i/j51fmnj
Logged

Bonknuts

  • Hero Member
  • *****
  • Posts: 3292
Re: Supergrafx White Screen
« Reply #1 on: January 28, 2014, 09:07:55 AM »
What games have you tried? Did you try flipping the compatibility switch on the back? Yeah, the wire mode seems to be on all SGX models that I've taken apart. Others have mentioned it as well.
Logged

wildo2ne

  • Jr. Member
  • **
  • Posts: 99
Re: Supergrafx White Screen
« Reply #2 on: January 28, 2014, 09:18:05 AM »
I am not concerned with the wire mod, I was looking at the solder job on the shield that attaches to pin 9, not sure if that should be soldered to a pin but I would think it should not be. I tried flipping the switch, I have 3 supergrafx games I tried and several hucards.
Logged

wildo2ne

  • Jr. Member
  • **
  • Posts: 99
Re: Supergrafx White Screen
« Reply #3 on: January 28, 2014, 09:58:48 AM »
anyone able to say what the wire mod is for?
Logged

SuperDeadite

  • Hero Member
  • *****
  • Posts: 2096
Re: Supergrafx White Screen
« Reply #4 on: January 28, 2014, 11:07:59 AM »
Awhile back my SGX woundn't do anything, so I took a close look and one of the big solder blobs holding on that cheap shield had cracked.  Reflowed them all and it's been fine since.
Logged
Stronger Than Your Average Deadite
Pages: [1]
« previous next »