RAU-30 SG

[mrchuck999]

Hi Everyone,
Can anyone tell me, Does the RAU-30 deliver power to run the Supergrafx so it does not need its own power supply? It would make sense since the little PCE gets its power through the cd-rom interface port, but I need to confirm this since I do not own the RAU-30 yet.

[BlueBMW]

I believe the last time I used a RAU-30 with a supergrafx I had to power the SGX with its own supply.

[Tatsujin]

the RAU 30 only serves as a connection extension between the SGFX and the IFU30/SCD device., since the SGFX won't fit into those by default.

[mrchuck999]

Thanks Tatsujin,
Please note: The SG does fit into the SuperCDROM2 add-on. and can be powered with a special jumper from the SuperCD to the SG. It is curious that NEC did not power the SG via the RAU-30 umbilical cord.   

[Tatsujin]

oh yes sorry my bad..what i originally ment is, that it basically was designed only for the IFU30 purpose

[ultrageranium]

How does that work for the video if one plugs the SGX in this device?

Does it use the video out of the SGX or the one of the IFU-30?

I assume the RAU-30 because of the audio signals coming from CD, but just curious. I have a SGX and an IFU-30 and I contemplating the idea of either getting an RAU-30 or a Super-CD-Rom², and then do tha appropriate RGB mod for whichever ones.

[jeffhlewis]

Thanks Tatsujin,
Please note: The SG does fit into the SuperCDROM2 add-on. and can be powered with a special jumper from the SuperCD to the SG. It is curious that NEC did not power the SG via the RAU-30 umbilical cord.   

Just make sure you have 6 square feet of surface to place the SGX+SCD2. It's glorious.