COMPLETE -- thanks everyone especially Phase for making this happen

[schweaty]

TIf you have the manuals I listed and a scanner, please PM me.  They don't need to come from the same person, so if you have one of these manuals and a scanner, we need your help.  Phase is going to put together some custom covers for these 2 games and we need some high quality scans to start with.  Thanks!

Edit:  1 down.  Just need Soldier Blade. 

[RoyVegas]

Bernie already has Soldier Blade scanned and up for member usage here:

http://www.pcenginefx.com/forums/index.php?topic=11317.0

Will that work for SB?

[schweaty]

i will pass it on to Phase.  He said he had a scan for Soldier Blade but he wasnt sure if he liked it or not.  Not sure if this is the one he has.  Thanks RoyVegas.

[Phase]

I’ll chime in, Shweaty is requesting these two covers for the TCP TG16 DVD case project located here:  http://www.thecoverproject.net/forums/index.php?topic=4007.0

Scanning guide
These use the instruction manual cover (not the box)
For the scans its nice if you have a decent scanner thats not too old, then the scans should be 600dpi with descreen checked (some scanners have a magazine mode or picture mode)
Everything else is unchecked (like text enhancement etc.)
Also I usually preview scan then highlight just the cover area with a little extra room on each side. Then scan and save as a .tiff (they should be around 25 megs a piece)

Some techniques that I would recommend are
1- put black or dark paper behind the front cover
(this helps text from the back of the cover and page 1 to not show through)
2-put a black t-shirt over the scanner window and the cover, keep the lid up and put something hard and flat on top of the cover area (I have a piece of Plexiglas around the size of a dvd case)
then i put a 2.5 pound weight on top of the plexiglass.
the black t-shirt will keep light from bleeding in around the spine and rest of the cover
the flat object and weight will compress the cover better than the lid

You can zip them (it will be around 50 megs) and send them to my gmail if you don’t have a storage site. ektophase at gmail .com

[SuperPlay]

3 scans of Dead Moon cover here for you in one rar.  I have not edited these at all so take them as they are!

400 DPI
600 DPI
600 DPI with Screen at 133lpi

http://tinyurl.com/mdbn4u5


Sorry I don't have Soldier Blade

[schweaty]

3 scans of Dead Moon cover here for you in one rar.  I have not edited these at all so take them as they are!

400 DPI
600 DPI
600 DPI with Screen at 133lpi

http://tinyurl.com/mdbn4u5


Sorry I don't have Soldier Blade

You Rock!

[Phase]

Awesome thanks, I just checked them out and the second scan looks good.
The third is a bit too blurry.

So the second one is usable and good the only slight flaws are there is some light bleeding in from the sides creating lighter edges. If only the lid were black.. you could try the second tip from my last post.
Comparing your scan to an online reference the top of the manual could have been cropped slightly by the scanner (this could also just be how your manual was cut at the factory though) I usually keep the manual away from the edges and just straiten it in PS if its a little crooked.

Otherwise it looks good, I should be able to work on this later tonight but I'll save the cover for last encase you feel like taking another scan.

[SuperPlay]

You are not wrong about the cropping of the scan. I have investigated and
this is noted in the scanners manual:

"An area 0.12 inch (3 mm) from the horizontal and the vertical sides of the scanner glass
cannot be scanned. If you place a document in the corner of the document table, move it
down and in slightly to avoid cropping"

I will re-scan again later.

[Phase]

If you scanned it already I could take a look
Otherwise your scan from yesterday turned out real good and should be fine.

Downloads
http://www.ektophase.com/TG16/tg16_deadmoon.jpg
http://www.ektophase.com/TG16/tg16_deadmoon_2.jpg

[SuperPlay]

Looks great, nice work :-)

[schweaty]

Brilliant!  Any luck with the Soldier Blade image you have?

[Phase]

Negative, the Soldier Blade scan I have is a little too grainy and washed out. 

[schweaty]

BUMP.  Help a bruva out

[roflmao]

PM sent!

[schweaty]

Still looking.  This is harder than I thought