stumped on a Turbo Express repair (pics inside)

[schweaty]

thanks, guys.  i will check all the voltages again.  the first time i checked, I think I used a common ground for the neg lead. 

the screen was checked on a good TE and it worked perfectly, so now its just a matter of finding the gremlin. 

If any of you guys could give me a path on the pcb to trace from pin2 that you are aware of, i would also appreciate it.

[thesteve]

that board can be a pain to trace as its a bizarre multilayer board
the board is double sided, than insulation painted, than another copper layer on top of that.
if i had one apart i would trace it, but ATM i dont

[schweaty]

just rechecked every cap.  everything seems normal except the 10uF16V.  it only showed 3.9V.  and CC703 (100uF6V) only had 2.2V.  no idea what those caps do.

[thesteve]

vref and video drive filter
the voltages look good
check the resistance to ground good and bad (no power) of pin2