Author Topic: Turbo Express with no power  (Read 198 times)

HoocasLenkels

  • Newbie
  • *
  • Posts: 26
Turbo Express with no power
« on: December 19, 2014, 04:35:33 PM »
So, to keep it short and sweet, I replaced the caps in another Turbo Express I recently got. I plugged in the ac adapter, and turned it on. All was well then suddenly it shut off. Now it won't power back on at all. I tested the ac adapter with my other unit and it works fine.

Could something have fried? Maybe blew the fuse? Any insight is appreciated. I don't have my meter on me at the moment  ](*,) thanks everyone!

Keith Courage

  • Hero Member
  • *****
  • Posts: 2690
Re: Turbo Express with no power
« Reply #1 on: December 19, 2014, 07:44:04 PM »
Yes, the fuse might have gone bad. The fuse is circled in blue in this picture http://postimg.org/image/fcdk8fttf/. Not that it is the safest thing to do but you can touch a wire to each end bypassing the fuse for a short moment just to see if it turns on. Then you will know if it is the problem. I believe it is a 125V 1A fuse. I've used these with great results http://www.ebay.com/itm/10-pcs-1A-axial-leaded-fuse-BEL-MQ1A125V-/130370761057?pt=LH_DefaultDomain_0&hash=item1e5ab3f161

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbo Express with no power
« Reply #2 on: December 31, 2014, 02:22:38 AM »
I would also check for caps that's installed in reversed polarity.


Sent from my iPhone using Tapatalk
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

cjameslv

  • Hero Member
  • *****
  • Posts: 938
Re: Turbo Express with no power
« Reply #3 on: December 31, 2014, 02:50:53 AM »
All the above (most likely the fuse) but also check the power plug solder joints for cracks.