« previous next »
Pages: 1 [2]

Author Topic: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo  (Read 1625 times)

SmokeMonster

  • Full Member
  • ***
  • Posts: 198
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #15 on: February 11, 2015, 03:09:47 PM »
Quote from: SignOfZeta on February 11, 2015, 02:30:06 PM
How fuzzy is it? I ask because if it's like most 3D printed white stuff it's going to get really grungy really quickly if you don't paint it.
Maybe a tad fuzzy. I hadn't noticed until you mention it. A painting is in order then.
Logged

NightWolve

  • Hero Member
  • *****
  • Posts: 5277
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #16 on: February 11, 2015, 04:11:44 PM »
Shipping could be cheaper than $6.50 but they're only offering 2-day Express with UPS so that would be why. Maybe they had an option for regular 5-day service when Smoke ordered his. Well, very tempting still, am thinking about it...
Logged

imparanoic

  • Sr. Member
  • ****
  • Posts: 297
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #17 on: February 11, 2015, 04:55:22 PM »
I presume shipping cost to uk or HK should be reasonable
Logged

SmokeMonster

  • Full Member
  • ***
  • Posts: 198
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #18 on: February 11, 2015, 07:10:21 PM »
It also has a hole for the LED to shine through.


« Last Edit: February 12, 2015, 01:16:16 PM by SmokeMonster »
Logged

DragonmasterDan

  • Hero Member
  • *****
  • Posts: 3508
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #19 on: February 11, 2015, 10:03:12 PM »
I ordered one. At 12.73 if it fits on the everdrive cleanly it should be worth it.
Logged
--DragonmasterDan

Keith Courage

  • Hero Member
  • *****
  • Posts: 2690
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #20 on: February 22, 2015, 11:33:12 AM »
This is great. Now we need someone to upload the dimensions of some DUO hu card covers :)

Please?
Logged

jelloslug

  • Hero Member
  • *****
  • Posts: 925
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #21 on: February 22, 2015, 12:55:52 PM »
Quote from: Keith Courage on February 22, 2015, 11:33:12 AM
This is great. Now we need someone to upload the dimensions of some DUO hu card covers :)

Please?


http://www.pcenginefx.com/forums/index.php?topic=18611.0
Logged

NightWolve

  • Hero Member
  • *****
  • Posts: 5277
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #22 on: February 22, 2015, 04:41:01 PM »
Well, my Turbo Everdrive is on its way to a new owner, might get there manana, if not Tuesday... Will be waiting for TEv2 and I suspect all these cover designs will be invalidated. Glad I didn't buy one. :/
Logged

DragonmasterDan

  • Hero Member
  • *****
  • Posts: 3508
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #23 on: February 23, 2015, 05:43:42 AM »
I got a shipping notification mine.
Logged
--DragonmasterDan

TurboGrafx

  • Guest
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #24 on: February 23, 2015, 09:04:41 AM »
ordered one!
Logged

DragonmasterDan

  • Hero Member
  • *****
  • Posts: 3508
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #25 on: February 25, 2015, 10:08:25 AM »
Got mine today, had to snap off a tiny piece on the end that was getting stuck with the duo power lock switch went in. Once I got it off it fits on fine.
Logged
--DragonmasterDan

SmokeMonster

  • Full Member
  • ***
  • Posts: 198
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #26 on: February 25, 2015, 10:31:40 AM »
Quote from: DragonmasterDan on February 25, 2015, 10:08:25 AM
Got mine today, had to snap off a tiny piece on the end that was getting stuck with the duo power lock switch went in. Once I got it off it fits on fine.

Yeah, my duo came in yesterday and I noticed that right away too.



This is the corner protrusion that must be filed down or removed to make it compatible with the Duo's lock.
Logged

DragonmasterDan

  • Hero Member
  • *****
  • Posts: 3508
Re: Turbo Everdrive 3D Printed Shell - $6 at Sculpteo
« Reply #27 on: February 25, 2015, 11:28:41 AM »
Quote from: SmokeMonster on February 25, 2015, 10:31:40 AM
Quote from: DragonmasterDan on February 25, 2015, 10:08:25 AM
Got mine today, had to snap off a tiny piece on the end that was getting stuck with the duo power lock switch went in. Once I got it off it fits on fine.

Yeah, my duo came in yesterday and I noticed that right away too.



This is the corner protrusion that must be filed down or removed to make it compatible with the Duo's lock.


I just bent it with enough force and it snapped right off
Logged
--DragonmasterDan
Pages: 1 [2]
« previous next »