Author Topic: Turbografx-16/PC-Engine RGB Amp Now Available for Sale  (Read 1128 times)

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #15 on: May 23, 2015, 09:00:31 PM »
as for the V2 component board you only need to use 1 5V and 1 ground pin as they are connected on the board

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #16 on: June 05, 2015, 01:09:59 AM »
Same RGB Amp works on the N64 with the VDC-NUS chip as well.
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

leonk

  • Newbie
  • *
  • Posts: 49
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #17 on: June 11, 2015, 08:52:19 AM »
turbokon: Does this amp remove the faint jail bars that seem to plague the TG16 in RGB mod? If not, what do you suggest someone can do to fix it?

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #18 on: December 09, 2015, 10:30:36 AM »
Bumping this!
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #19 on: December 09, 2015, 11:59:56 AM »
it cant remove them, but shouldnt cause them either

MNKyDeth

  • Hero Member
  • *****
  • Posts: 715
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #20 on: December 09, 2015, 11:27:58 PM »
I have been using these amps for a bit now, it seems I can never get enough of them.

From my experience so far, I cannot see any jailbars with my setup or with any of the consoles I have tested. So I assume it's more my setup.

BenQ RL2460HT computer monitor, Framemeister XRGB-mini, RGB amp from Turbokon and I usually have been buying my cables from retrogamingcables as they are way better than the ones I can make.

My US Duo is the only console I put the 22uF ceramic caps on the Hu6280 pins to ground that was mentioned in another thread. But honestly.... The Duo-R's, Duo's, and Supergrax that I have tested with these amps with or without the 22uF caps I see no jailbars whatsoever.

Not sure... but I think I still need two more of these and two more Obey chips. Prolly get another order today or next week. :)

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #21 on: January 02, 2016, 04:19:06 AM »


Using this amp with a scart to hdmi converter..
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #22 on: January 09, 2016, 12:55:51 AM »




Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

wilykat

  • Hero Member
  • *****
  • Posts: 908
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #23 on: January 09, 2016, 11:12:05 AM »
Looks like you took the RF modulator out.

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #24 on: January 12, 2016, 02:24:32 PM »

Looks like you took the RF modulator out.


yep that's correct

I just did an rgb mod to a tgcd rock ask well.  Now I have the best of both world, rgb and component.





Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #25 on: March 27, 2016, 03:26:46 AM »
We had some reports from the field of slow start up time when using this rgb amps.  This is due to charging time for the input 10uf caps.  Changing them to 1uf or even 0.1uf will provide a lot faster start up time.  Here is a little video of the psone lcd mod.  This mod uses the rgb amp mod chip.  When I switched out the 10uf capacitors to 1uf, the start up time was significantly faster. I will start shipping these out with the change in caps from now on.
« Last Edit: March 27, 2016, 03:29:13 AM by turbokon »
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #26 on: March 28, 2016, 03:34:21 AM »
Confimed, 0.1uf caps will make it start up instantly.
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16/PC-Engine RGB Amp Now Available for Sale
« Reply #27 on: April 02, 2016, 04:48:05 PM »
Double screen action.


Via Component video on crt


Via rgb scart to hdmi using this rgb amp.
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com