Turbografx-16/PC-Engine RGB Amp Now Available for Sale

[turbokon]

As you guys already know, I sell the rgb to component boards, obey region chip and soon to be the component box.  Over the years, I have gotten a lot of request for a RGB amp chip.  I have listen and I'm happy to announce that I will start offering a newly specifically designed (by the great thesteve) RGB amp for our beloved tg16/PCE.  Prices are $18 plus shipping. 





Install Guide:
http://www.mediafire.com/view/nxfvsp9k75mk518/RGB_AMP_Guide.pdf

Ordering:
PM me here or order from my website at www.tg16pcemods.com]http://www.tg16pcemods.com]www.tg16pcemods.com

[cjameslv]

Broken already sells these...

[turbokon]

Yes, I'm aware there are a couple of people here that already sell this.  These are of different design.  Btw I've been meaning to add this to my product line.

[tool]

dude there is a thread on Digitpress where they are asking whether DUO's and other NEC stuff can output RGB or not. They might be interested in your items. Here is the link:
http://forum.digitpress.com/forum/showthread.php?166543-Does-the-Pc-engine-DUO-output-RGB

[cjameslv]

Yes, I'm aware there are a couple of people here that already sell this.  These are of different design.  Btw I've been meaning to add this to my product line.

That's cool, i bought and use your rbg to componet boards and they work good. Definitely keep up the work on the new box too but yeah there is a few people selling rbg amps pnauts/broken/ cant think of others names atm, but its pretty saturated already.

[PunkicCyborg]

Cool news! Might want to consider selling the pcb mount 8 pin din plugs and scart cables too as a set. Majority of people who use RGB will be using that kind of set up

[seieienbu]

Could you post some screenshots comparing component to RGB?  I've been meaning to fix up my Duo for a while but have been on the fence on which way to go for improved video output...

[thesteve]

RGB if your screen can take it

[farankoshan]

Any word yet on the RGB amp? 

Would you be selling these amps already built & ready to be "installed"?

[PunkicCyborg]

Broken already sells these...

Actully he doesnt anymore. Some people bought up his stock a while back.

[turbokon]

Rgb amp are here.  Message me if you want to buy one or two:)

[MNKyDeth]

turbokon...  You can barely read those instructions. White words on a white background. I know it starts white then goes blackish/grey at the bottom but nothing can be read in the top area.

Just a heads up you may need to adjust it a little.

[MotherGunner]

Hi TK, do you have any game pictures using the Amp?

Thanks!

[MNKyDeth]

Ok, just ordered one of these boards. I also have the RGB to component v2 board as well.

I have not hooked up the V2 board yet as I have been trying to find the stuff I need and trying to plan out how I want to mod my Duo exactly.

I however do have a couple questions regarding each of these boards.

I have the V2 board without the Sync Stripper board. Do I need to hook up ground and +5v to both sides of the board or just one? If I need to hook up the +5v and ground on component side of the board do I send them out to the component part with the wires and to where? Or do I just need to hook it up to the motherboard of the Duo like the RGB side?

Last question on the V2.... Since I do not have the Sync Stripper part of the board do I need to do anything special to the component out cable or anything?

The RGB amplifier board, can I hook those into a YPrPb input on a TV? Or does it need to be specifically to a scart type cable then TV or converter?

My idea was to put in two mini DIN 7 pin connectors on the back of the Duo. Then make the proper cable from the mini DIN to the TV or converter device. I want to run the video and audio through the mini DIN to reduce any extra connection coming out the back of the Duo.

Any advice is appreciated.

[goombakid]

I have the V2 board without the Sync Stripper board. Do I need to hook up ground and +5v to both sides of the board or just one? If I need to hook up the +5v and ground on component side of the board do I send them out to the component part with the wires and to where? Or do I just need to hook it up to the motherboard of the Duo like the RGB side?

I just installed one of these in a Duo-R. I wondered the same thing, so I did wire up (daisy chained) both 5v points on the board to the 5V pin on the AV connector. I looked at the traces and it looked like both points were linked up to different components on the board itself.

Last question on the V2.... Since I do not have the Sync Stripper part of the board do I need to do anything special to the component out cable or anything?

You shouldn't, as long as you're using Composite Sync to the Component mod board.

The RGB amplifier board, can I hook those into a YPrPb input on a TV? Or does it need to be specifically to a scart type cable then TV or converter?

You may wanna read up on RGB HERE and HERE.

The short of it is: No, you won't be able to hook it directly to Component. Yes, you'll need either a RGB capable monitor or a scaler to convert the RGB signals to use on other monitors.