Avenue 6 mod - 3 Button mode

[Duo_R]

Makes this controller even more versatile, with 3 button capability.

Please subscribe for future projects. If there is enough interest I can release a full tutorial.

[ProfessorProfessorson]

Shows cool mod. Doesn't give link showing how to do cool mod. GG.

EDIT: I mean seriously, you should know people would want to know how to do this.

[sirhcman]

If there is enough interest I can release a full tutorial.

sweet mod! i vote for a tutorial!

[csgx1]

That's awesome.  Yes, tutorial please.

[GohanX]

Tutorial! Tutorial!

[schweaty]

Shows cool mod. Doesn't give link showing how to do cool mod. GG.

EDIT: I mean seriously, you should know people would want to know how to do this.

+1.... much side-eye directed at duo_r

[Duo_R]

Lol it's coming I got to do some more filming and editing

[deubeul]

I totally forgot about this thread and can't help but bumping it, sorry  :oops:

[Duo_R]

Thanks for the bump

[Vimtoman]

I like this mod.
You gotta show us how you done it.

[Duo_R]

I'm a slacker!!!!!

[ProfessorProfessorson]

Interest is still there, post the info!

[Duo_R]

Ok I'll try and do a quick video on the inside. Essentially what I am doing is using a switch to toggle from III to another switch that shorts it to select or run. The switch on the right changes from either normal III mode or the "3 button mode" if that makes sense. Then from there it goes to a 2pdt switch where you can select either select or run.

The project used two small 2PDT switches.

[ProfessorProfessorson]

Yeah I figured you just used a couple slide switches and cut a trace or two and rewired something. But yeah, post something up. I wanna see what size switch you went with and the placement. I just got a AVE Pad 6 in, so I am interested in nabbing some switches and doing the mod.

Note: you dont have to do a full on video guide, would just be cool to have some HQ pics showing the switch placement, what traces you cut, and what areas you tapped/soldered on to.

[Duo_R]

for sure that wouldn't be hard. Yeah I will pop it open. I do believe I had to cut a trace so it will be helpful to share a photo.

Yeah I figured you just used a couple slide switches and cut a trace or two and rewired something. But yeah, post something up. I wanna see what size switch you went with and the placement. I just got a AVE Pad 6 in, so I am interested in nabbing some switches and doing the mod.

Note: you dont have to do a full on video guide, would just be cool to have some HQ pics showing the switch placement, what traces you cut, and what areas you tapped/soldered on to.