I found that getting up off my arse every time I wanted to change a game on the Turbo Everdrive was in need of a solution.
Nope not a extra long stick but an IR remote controlled reset.
I bought one of these remotes online really cheap.
I programmed it using the routines from this web site.
https://arduino-info.wikispaces.com/IR-RemoteControlModiying it in two sections. I had kept all the other sections of code for testing on serial.
void setup() /*----( SETUP: RUNS ONCE )----*/
{
Serial.begin(9600);
Serial.println("IR Receiver Raw Data + Button Decode Test");
irrecv.enableIRIn(); // Start the receiver
pinMode(2,OUTPUT);
digitalWrite(2,HIGH);
}/*--(end setup )---*/
and changed the case routine on several buttons.
Only one shown below.
This adds a 600ms pulse to reset the Everdrive.
case 0xFF22DD:
digitalWrite(2,LOW);
Serial.println(" PREV ");
delay(600);
digitalWrite(2,HIGH);
break;
Wire the IR sensor to the Arduino Mini and Turbo Everdrive using the colour coded diagrams below.
Turbo everdrive pinout
IR sensor pinout
Arduino mini 168 pinout
Finished test item
Topic: Turbo Everdrive IR remote control reset (Read 396 times)
