Turbografx-16 & PC-Engine Reproduction Hucards & Cases Now for Sale!!!!

[esteban]

Did somebody asked for terra cresta ii?

Using the last bit of strength I can muster....

...before my broken body shuts down completely...

Every single HuCARD + packaging = Phenomenal!

...arrghhh...


Terra Cresta II, pictured above = Godhead


.....pfshhhhh.....

[wilykat]

Suggestion: put that grey dot somewhere else, it looks a bit nasty covering part of PC Engine logo.  A little up should work and still be useful enough to keep the card from bouncing around.

[HailingTheThings]

Do these HuCARDs fit in those cases if they have a sleeve on? Maybe my eyes are going bad, but it looks like they be nakey in the pics?

[turbokon]

Suggestion: put that grey dot somewhere else, it looks a bit nasty covering part of PC Engine logo.  A little up should work and still be useful enough to keep the card from bouncing around.

Good point, that's easy to remedy. 

[turbokon]

Do these HuCARDs fit in those cases if they have a sleeve on? Maybe my eyes are going bad, but it looks like they be nakey in the pics?

Yeah its nakey.  It won't fit the case with the sleeve. 

[mickcris]

Suggestion: put that grey dot somewhere else, it looks a bit nasty covering part of PC Engine logo.  A little up should work and still be useful enough to keep the card from bouncing around.

Good point, that's easy to remedy.

If you can find black ones, you could put 1 above and 1 below in the black area to camouflage them a bit.

Or 2 white ones in the white areas 

[HailingTheThings]

Do these HuCARDs fit in those cases if they have a sleeve on? Maybe my eyes are going bad, but it looks like they be nakey in the pics?

Yeah its nakey.  It won't fit the case with the sleeve.

Thanks.

[Skins4thewin]

I am also very excited for the possibility of Translated versions of games for these.

[turbokon]

Couple of more games I just made.

[NightWolve]

It's hard to believe working HuCards are in production again like this... Wonder about the factory they found to get these made, what it took behind the scenes, impressive all the way!

[mickcris]

It's hard to believe working HuCards are in production again like this... Wonder about the factory they found to get these made, what it took behind the scenes, impressive all the way!

Pretty sure they are from here
https://www.pcenginefx.com/forums/index.php?topic=19848.0

Not sure how is making them though 

[thesteve]

It's hard to believe working HuCards are in production again like this... Wonder about the factory they found to get these made, what it took behind the scenes, impressive all the way!

Pretty sure they are from here
https://www.pcenginefx.com/forums/index.php?topic=19848.0

Not sure how is making them though 

i assure you they are not..............
i did the layout on them

[mickcris]

Cool.  They just look very similar.  In that thread turbokon had shown where he had some and was programming them.

[thesteve]

they may look similure, but they dont feel it
these dont use a plastic backing, and instead both sides are FR4 fiberglass material, making them extremely sturdy and cold to the touch

[NightWolve]

https://www.pcenginefx.com/forums/index.php?topic=19848.0

Ah right, turbokon started there, ordered some from that French guy, learned how to program them, and later teamed up with Jodi and Steve to do their own with full cases/manuals also.

So Steve, what factory did you find to produce the cards, like what ichigobankai found, this http://www.ponoko.com/ ?