Author Topic: Offical NEC Arcade Board???  (Read 327 times)

rcantor77

  • Full Member
  • ***
  • Posts: 200
Offical NEC Arcade Board???
« on: May 17, 2016, 01:55:59 AM »
Today this very curious item got delivered that I won on Yahoo Auctions last month.

It is what appears to be an officially made PC Engine Arcade Board... as you can see from the pictures, it has Hudson chips (Hu6260, Hu6270 and Hu6280) along with some screen printed writing... NEC PWD-678 72406781.

At the front there is the HuCard slot and a slide power button, which makes me think this was maybe mounted in something... there is also an on-board controller port.

Then at the back the board has two connectors, one for Audio/Video and the other for power... there is also 3 adjustment pots in the middle of the board which maybe is for audio volume... I am not sure yet.

Now the writing on the board got me thinking as they looked familiar, so I looked at the other console main boards to compare...

White   -   PWD-623A 72406235
Core      -   PWD-814A 72408141
Core 2   -   Same as above
Shuttle   -   TBC
Super   -   PWD-820A 72408201
Duo      -   PWA-3285-A 72932851/5
Duo-R   -   PWA-3339-A 7233392
Duo-RX   -   PWA-3365-A 72933652

TG16   -   PWD-782A 72407822
TG-PAL   -   PWD-913A 72409131
T.Duo   -   PWA-3321-A 72933211


So looking again at what is on this board (PWD-678 72406781) it places its production between the original White and Core Grafx units.

Next job is to wire up a new connector and install in a cab and see what happens... I will keep you posted.

Has anybody ever seen a board like this before... let me know what you think.




PC-Engine.co.uk - definitive hardware listing for all PC Engine and Turbo Grafx systems.

Black Tiger

  • Hero Member
  • *****
  • Posts: 11242
Re: Offical NEC Arcade Board???
« Reply #1 on: May 17, 2016, 02:24:19 AM »
Looks like a board pulled from a something like a Sharp X1 with a homemade pin adaptor.
http://www.superpcenginegrafx.net/forum

Active and drama free PC Engine forum

ccovell

  • Hero Member
  • *****
  • Posts: 2245
Re: Offical NEC Arcade Board???
« Reply #2 on: May 17, 2016, 02:57:22 AM »
Indeed, it appears to be the PCE portion of the NEC PC-KD863G computer monitor (with built-in PC-Engine).

Google Image link

rcantor77

  • Full Member
  • ***
  • Posts: 200
Re: Offical NEC Arcade Board???
« Reply #3 on: May 17, 2016, 03:07:12 AM »
Yeah it is  the board form the PC-KD863G, can't believe I overlooked that board when looking at all the board versions to compare.

Oh well, it is not some undiscovered board but still nice to have...
PC-Engine.co.uk - definitive hardware listing for all PC Engine and Turbo Grafx systems.

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21369
Re: Offical NEC Arcade Board???
« Reply #4 on: May 17, 2016, 03:35:53 AM »
'Tis still neat that you've documented the board number and shown what it looks like.  What's on the cables off the back side?  Two for power/ground and the other dozen for stereo and RGB?
U.S. Collection: 98% complete    157/161 titles

Black Tiger

  • Hero Member
  • *****
  • Posts: 11242
Re: Offical NEC Arcade Board???
« Reply #5 on: May 17, 2016, 07:24:11 AM »
That's the one I was thinking of. lingr has had it on eBay for so long now that more time has passed since it was listed than between when it was released and when it was listed. :P
http://www.superpcenginegrafx.net/forum

Active and drama free PC Engine forum

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21369
Re: Offical NEC Arcade Board???
« Reply #6 on: May 17, 2016, 08:31:53 AM »
It's definitely not the Sharp Twin thingy.  They (Sharp) made the PCB themselves and stamped their name all over it.
U.S. Collection: 98% complete    157/161 titles