Author Topic: IFU Transistor?  (Read 380 times)

NichlasEk

  • Jr. Member
  • **
  • Posts: 50
IFU Transistor?
« on: March 04, 2017, 04:11:03 AM »
I got a smokers ifu with core grafx and a super cd drive.
I took everything apart and washed it.

Hooked up a rgb amp and tried with the pc engine hue card side. All was well.

Put the black top on and had to push to get the clips on

All is not well.... no power. Opened it up. And the damn mosfet/transistor next to the 7805 was crushed on the grey plastic post. IDIOT!

Anyone have an idea of waht to replace the transistor with.


SignOfZeta

  • Hero Member
  • *****
  • Posts: 8497
Re: IFU Transistor?
« Reply #1 on: March 04, 2017, 03:37:17 PM »
They have writing on them. It's quite possible the original will be out of production but there will likely be literally hundreds if not thousands of compatible ones which you can verify online...somewhere.

NichlasEk

  • Jr. Member
  • **
  • Posts: 50
Re: IFU Transistor?
« Reply #2 on: March 04, 2017, 05:09:21 PM »
Fine. I might be lasey. Il have a look. But the transistor is cracked. Might not be able to read.

Keith Courage

  • Hero Member
  • *****
  • Posts: 2690
Re: IFU Transistor?
« Reply #3 on: March 04, 2017, 05:29:52 PM »
It is a NEC C2275. You should be able to find one fairly easily online now.

http://www.semicon-data.com/transistor/tc/c0/C2275.html
« Last Edit: March 04, 2017, 05:31:30 PM by Keith Courage »

NichlasEk

  • Jr. Member
  • **
  • Posts: 50
Re: IFU Transistor?
« Reply #4 on: March 04, 2017, 05:36:34 PM »
Much obliged. Thanks.

Keith Courage

  • Hero Member
  • *****
  • Posts: 2690
Re: IFU Transistor?
« Reply #5 on: March 04, 2017, 05:41:09 PM »
How did you crush it? That must have been a lot of force used to get that back part clipped on. Lol

NichlasEk

  • Jr. Member
  • **
  • Posts: 50
Re: IFU Transistor?
« Reply #6 on: March 04, 2017, 06:50:34 PM »
There might have been liqure involved.

NichlasEk

  • Jr. Member
  • **
  • Posts: 50
Re: IFU Transistor?
« Reply #7 on: March 13, 2017, 09:19:54 AM »
I went with the TIP29C. Seems to be working fine.
Now to get that laser calibrated/changed. Leaning toward a change.