« previous next »
Pages: [1]

Author Topic: Pre-Existing Repair/Modification  (Read 428 times)

pinkspider

  • Newbie
  • *
  • Posts: 3
Pre-Existing Repair/Modification
« on: June 12, 2017, 04:06:35 AM »
Greetings. New member, long time TG16/PCE fan.
I opened a TurboGrafx 16 I own this weekend to do an RGB mod. I have owned this unit for a few years, bought it used.
Anyway, I seen some work had been done previously and am personally unfamiliar with these modifications. I am not an electrician by any means, but have basic wiring and soldering skills as I work as a manufacturing engineer.
Please see the included photos.
Any help is much appreciated.
I have uploaded the image to Imgur.
Logged

SignOfZeta

  • Hero Member
  • *****
  • Posts: 8497
Re: Pre-Existing Repair/Modification
« Reply #1 on: June 12, 2017, 05:10:48 AM »
Honestly, I don't know. However if you are doing and RGB mod this shouldn't interfere with it. They took the +5 from video and sent to whatever that circuit is it's going to. Perhaps this is an Everdrive compatibility hack?
Logged

pinkspider

  • Newbie
  • *
  • Posts: 3
Re: Pre-Existing Repair/Modification
« Reply #2 on: June 12, 2017, 12:27:48 PM »
I do have an Everdrive, however I purchased this system long before the Everdrive existed, so couldnt have been that. The system works otherwise. Thanks for the help.
Logged

SignOfZeta

  • Hero Member
  • *****
  • Posts: 8497
Re: Pre-Existing Repair/Modification
« Reply #3 on: June 12, 2017, 02:45:37 PM »
Maybe it's power for the RGB amp?
Logged

incrediblehark

  • Hero Member
  • *****
  • Posts: 638
Re: Pre-Existing Repair/Modification
« Reply #4 on: June 12, 2017, 05:01:50 PM »
This reminds me of a mod you had to do to get one of those hucard adapters to work on your PC Engine. (The "purple barney" type) but IIRC the wire mod wasn't needed on US systems.

Honestly I'm not sure if this is it, just throwing it out there.

EDIT: After looking at the pic closer, its definitely not what I was referring to, disregard above comment  :P
« Last Edit: June 12, 2017, 05:26:43 PM by incrediblehark »
Logged

mickcris

  • Hero Member
  • *****
  • Posts: 754
Re: Pre-Existing Repair/Modification
« Reply #5 on: June 12, 2017, 06:00:30 PM »
Wire looks to be connected to pin 2.  The pinout i found labels it as OSC witch I'm guessing is oscillator.  Not sure what the purpose would be.
Logged

SignOfZeta

  • Hero Member
  • *****
  • Posts: 8497
Re: Pre-Existing Repair/Modification
« Reply #6 on: June 12, 2017, 06:39:54 PM »
Ah, I thought it was pin 1. Perhaps OSC is a sync source?
Logged

gtsamour

  • Full Member
  • ***
  • Posts: 149
Re: Pre-Existing Repair/Modification
« Reply #7 on: June 12, 2017, 10:45:53 PM »
The chip shielding on the left picture is normal, both of my TG16 have it.

On the right picture, i don't know what this cable is for but I can see the jail bar fix has been applied (ceramic cap added on C134). There has to be one more that is out of the picture.
Logged

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21366
Re: Pre-Existing Repair/Modification
« Reply #8 on: June 13, 2017, 02:49:34 AM »
Maybe it's just a fix for a borked trace.
Logged
U.S. Collection: 97% complete    155/159 titles

SignOfZeta

  • Hero Member
  • *****
  • Posts: 8497
Re: Pre-Existing Repair/Modification
« Reply #9 on: June 13, 2017, 04:00:27 AM »
Ah...yeah.
Logged

pinkspider

  • Newbie
  • *
  • Posts: 3
Re: Pre-Existing Repair/Modification
« Reply #10 on: June 13, 2017, 05:06:48 AM »
Quote from: gtsamour on June 12, 2017, 10:45:53 PM
The chip shielding on the left picture is normal, both of my TG16 have it.

On the right picture, i don't know what this cable is for but I can see the jail bar fix has been applied (ceramic cap added on C134). There has to be one more that is out of the picture.

Haha yes, I added in the jailbar fix. The red wire however was my concern.
I suspected it was to repair a damaged trace but wasnt entirely sure.
Thanks for all the input everyone.
Logged
Pages: [1]
« previous next »