I recapped a GT today that was totally dead. Did all the caps, cleaned it up and gave it a test and it was all working great, good picture and loud sound. Then I decided to wire up the RGB outputs to the HUC6260 and do the jailbar caps in preparation for a screen mod tomorrow. After doing this and testing again I got a blank screen and no sound. I checked my work again and I noticed I'd put one of the caps in with the wrong polarity - CC504. I replaced it but still no joy. I then checked all the RGB wiring and it was fine but I removed it anyway and still nothing.
The backlight is definitely working as I can still see a stuck pixel on the screen, this is a lack of video & sound. I'm beginning to think the reversed cap may have fried one of the ICs, and will probably try swapping them tomorrow - anyone have any other ideas on what this could be? I've tested for shorts all around that side of the board and haven't found any.