« previous next »
Pages: 1 [2]

Author Topic: PC Engine video problems  (Read 509 times)

tggodfrey

  • Hero Member
  • *****
  • Posts: 1117
Re: PC Engine video problems
« Reply #15 on: August 13, 2014, 05:07:29 AM »
when soldering you need to clean the flux off the board afterwards.  That too can add to your issues.
Logged
Games currently in play:
PS3: COD Ghosts
TG16: Boxyboy

dritske

  • Newbie
  • *
  • Posts: 19
Re: PC Engine video problems
« Reply #16 on: August 13, 2014, 08:34:19 AM »
Quote from: tggodfrey on August 13, 2014, 05:07:29 AM
when soldering you need to clean the flux off the board afterwards.  That too can add to your issues.
I'll try to clean the flux off first and let you guys know if it helped. If that doesn't work out I'm gonna remove all the soldering and try to get the signal from the source. Should I leave that mess at the bottom left like it is? I really don't have a clue what the modder tried to accomplish there.
Logged

Fidde_se

  • Sr. Member
  • ****
  • Posts: 297
Re: PC Engine video problems
« Reply #17 on: August 13, 2014, 10:01:23 PM »
In the picture, down at the controller input with the "fixes" the wires aren't insulated (except for one). So the question is (maybe unrelated to your other problem) are the wires touching each other or is that just how it looks?
Logged
GW/GB/GBP/GBL/GBC/GBA/GBASP/GBASP2/GBM/DS/DSL/DSiXL/3DS/PM/VB/FC/NES/SNES/N64/GC/Wii/PS/PSONE/PS2/PS2S/
SMS/SMS2/GG/NOM/MD/MD2/MD3/MD1CD/SS/DC/XB/XB360/NGP/NGPC/NGPC2/WS/WSC/CSW/PCEGT/PCE/PCECG1/PCECG2/
PCECD/TG16TE/NGAGE/GIZ/GP32/GP2XF1/GP2XF2/GP2XWIZ/GP2XCAN/DA320/ST520/ST1040/LNX/LNX2/JAG/PORT/CD32/A500/
C64/CDi/VMU/POCKSTN/PSP/PSPCFW/FDS/VSM
Pages: 1 [2]
« previous next »