Here's a pic of the LT on IFU setup. No mods to either system are needed, but you do have to have AC adapters connected to both.
You can either use just the LT monitor or you can have a Dual Screen setup:
For those that have asked, here are some hirez shots of the screen. Zoom them til they measure 4" diagonally across the LCD portion of the pic (18% on my monitor). This will give you a pretty good idea of what the actual screen will look like.
http://img842.imageshack.us/img842/4527/pb104076.jpghttp://img844.imageshack.us/img844/5031/pb104086.jpghttp://img684.imageshack.us/img684/3765/pb104094.jpghttp://img836.imageshack.us/img836/2628/pb104101.jpghttp://img850.imageshack.us/img850/238/pb104107.jpgIt's interesting that the developers of the IFU-30 didn't send enough juice to power the LT, yet they did think to send the video signal back into the LT through the bus. The LT is the only unit that I know of that can take the video signal out of this connection - are there any others?
By the way, the LT actually has 2 power connections.
- The one on the right of the unit is used when connected to the CDRom2. It powers just the monitor, so the power coming through the IFU powers the rest of the unit.
- The one on the left is used with the LT alone - this juices the entire unit, but it is still the same AC adapter.