Author Topic: Super CDRom 2 Issues, there's more! :s  (Read 957 times)

Lorfarius

  • Newbie
  • *
  • Posts: 48
Super CDRom 2 Issues, there's more! :s
« on: April 13, 2009, 12:46:24 AM »
Hello everyone

First time to the forums and effectively the first time into the world of the PCE for me. Up until a retro gaming show (Byte Back) in the UK I had no idea what the PCE/Turbo etc was even about but after seeing a few on display I was hooked and simply wanted to get my hands on one. I was able to pick up a PC Engine Core (the blue one) with an RGB Mod for that better picture display and a region switch on the back. After a few weeks playing various card games (my favourite being R-Type so far) I was offered the chance to get my hands on a Super CD Rom 2.

It came fully boxed with the standard Jap adaptor and a few games so I thought I'd be in for hours of fun. However after taking it home I plugged it in (using a Jap to UK adaptor) but nothing happened. I then visited a few forums and someone recommended this adaptor:

http://www.maplin.co.uk/Module.aspx?ModuleNo=32754

Sadly this didn't do the trick either and there seemed to be no power getting through and no lights on the Super CdRom to say it was working. So basically...I'm stumped. Does anyone else have any suggestions?
« Last Edit: April 15, 2009, 07:04:41 AM by Lorfarius »
My own Retro gaming YouTube channel: http://www.youtube.com/user/Lorfarius

Zeon

  • Sr. Member
  • ****
  • Posts: 391
Re: Super CDRom 2 Issue
« Reply #1 on: April 13, 2009, 12:51:05 AM »
You do have the "jumper" power cord that hooks power up from the core grafx to the super cd-rom correct? The super cd-rom does not get power simply by plugging it into the expansion bus and plugging in the core grafx.

Lorfarius

  • Newbie
  • *
  • Posts: 48
Re: Super CDRom 2 Issue
« Reply #2 on: April 13, 2009, 01:01:35 AM »
Sorry forgot to mention that! But yes the lead that links the Core to the CDRom is there.
My own Retro gaming YouTube channel: http://www.youtube.com/user/Lorfarius

Zeon

  • Sr. Member
  • ****
  • Posts: 391
Re: Super CDRom 2 Issue
« Reply #3 on: April 13, 2009, 01:05:15 AM »
No hucard game is in it correct? What setting do you have the power adapter on? If memory serves it is 12volts and center positive polarity, don't quote me on that though. Finally the led on the super cd-rom doesn't lite up at all until you have a cd in it and press run on the controller.

Lorfarius

  • Newbie
  • *
  • Posts: 48
Re: Super CDRom 2 Issue
« Reply #4 on: April 13, 2009, 01:43:37 AM »
Hussah! It worked just by pressing the Run button :oops:
My own Retro gaming YouTube channel: http://www.youtube.com/user/Lorfarius

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21366
Re: Super CDRom 2 Issue
« Reply #5 on: April 13, 2009, 05:56:30 AM »
Hussah! It worked just by pressing the Run button :oops:

Mwuhahahaha!  Dontcha just hate those 'senior moments'?  :lol:
U.S. Collection: 97% complete    155/159 titles

Lorfarius

  • Newbie
  • *
  • Posts: 48
Re: Super CDRom 2 Issue
« Reply #6 on: April 13, 2009, 07:50:38 AM »
Hussah! It worked just by pressing the Run button :oops:

Mwuhahahaha!  Dontcha just hate those 'senior moments'?  :lol:

 ](*,) Fraid so. I recently bought a MegaCD which tends to boot the games once they are in the drive so all I can say is that I was expecting the same to happen with the Super.  :oops:
My own Retro gaming YouTube channel: http://www.youtube.com/user/Lorfarius

Lorfarius

  • Newbie
  • *
  • Posts: 48
Re: Super CDRom 2 Issue
« Reply #7 on: April 15, 2009, 07:03:50 AM »
Have a few more questions  :oops: Thinking I might need some sort of memory card for the system (I'm hoping to play a few RPG's on it) I decided to invest in one of these:

http://www.genkivideogames.com/games/ten-no-koe-bank-hudson-soft-pcenginehardware/hc692

I also noticed this and thought it might make a good investment for any future game purchases:

http://www.genkivideogames.com/games/arcade-card-pro-no-box-nec-pcenginehardware/pceac2

Both seem to be compatible with the setup that I have but with the Super CD Rom 2 plugged in and switched on whenever I add a card (of any type, game or the above) I just get a blue or white screen. When I take them out the system runs fine. Am I missing something really obvious? Having said that is there a way to load card games without unplugging the Core from the CDRom system?  #-o
My own Retro gaming YouTube channel: http://www.youtube.com/user/Lorfarius

Zeon

  • Sr. Member
  • ****
  • Posts: 391
Re: Super CDRom 2 Issue
« Reply #8 on: April 15, 2009, 09:12:04 PM »
Have a few more questions  :oops: Thinking I might need some sort of memory card for the system (I'm hoping to play a few RPG's on it) I decided to invest in one of these:

http://www.genkivideogames.com/games/ten-no-koe-bank-hudson-soft-pcenginehardware/hc692

I also noticed this and thought it might make a good investment for any future game purchases:

http://www.genkivideogames.com/games/arcade-card-pro-no-box-nec-pcenginehardware/pceac2

Both seem to be compatible with the setup that I have but with the Super CD Rom 2 plugged in and switched on whenever I add a card (of any type, game or the above) I just get a blue or white screen. When I take them out the system runs fine. Am I missing something really obvious? Having said that is there a way to load card games without unplugging the Core from the CDRom system?  #-o


Having a super cd-rom attached to a core should not interfere with normal operation. Hucard games or otherwise should play just fine.

Lorfarius

  • Newbie
  • *
  • Posts: 48
Re: Super CDRom 2 Issues, there's more! :s
« Reply #9 on: April 15, 2009, 11:21:44 PM »
Nothing happens when I switch it on though :( The Core plays Hucard games just fine when its on its own but when I plug the two together I just get a blank screen for cards. My Core is a region modded unit though with a flick switch right next to the bus bay on the back. I'm going to buy a TG game and see if that makes any difference when I fire it up.

Edit. Problem solved! Just slid the two apart at the bus connector and eased the tension on the region switch. All working now. Phew!
« Last Edit: April 16, 2009, 01:14:32 AM by Lorfarius »
My own Retro gaming YouTube channel: http://www.youtube.com/user/Lorfarius

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21366
Re: Super CDRom 2 Issue
« Reply #10 on: April 16, 2009, 03:58:17 AM »
I also noticed this and thought it might make a good investment for any future game purchases:

http://www.genkivideogames.com/games/arcade-card-pro-no-box-nec-pcenginehardware/pceac2


You might be able to save yourself a few bucks by getting a Arcade Card Duo.  The Pro card is only needed if you have the original PCE-CD system, as it lacks the additional memory found in your Super-CD.
U.S. Collection: 97% complete    155/159 titles

Lorfarius

  • Newbie
  • *
  • Posts: 48
Re: Super CDRom 2 Issue
« Reply #11 on: April 16, 2009, 04:26:41 AM »
I also noticed this and thought it might make a good investment for any future game purchases:

http://www.genkivideogames.com/games/arcade-card-pro-no-box-nec-pcenginehardware/pceac2


You might be able to save yourself a few bucks by getting a Arcade Card Duo.  The Pro card is only needed if you have the original PCE-CD system, as it lacks the additional memory found in your Super-CD.


So if I buy this one then I can effectively play any of the CD games:

http://www.genkivideogames.com/games/arcade-card-duo-nec-pcenginehardware/pceac1

I'm most confused with these add on cards  #-o
My own Retro gaming YouTube channel: http://www.youtube.com/user/Lorfarius

td741

  • Sr. Member
  • ****
  • Posts: 424
Re: Super CDRom 2 Issues, there's more! :s
« Reply #12 on: April 16, 2009, 04:36:09 AM »

So if I buy this one then I can effectively play any of the CD games:

http://www.genkivideogames.com/games/arcade-card-duo-nec-pcenginehardware/pceac1

I'm most confused with these add on cards  #-o


All except:
-those games express games that have their own system card
-Altered Beast CD which requires the 1.0 System card for full functionality.
-You have a Japanese system so you also don't have to worry about the few buggy SCD games that don't work on a US SCD system. :P

Lorfarius

  • Newbie
  • *
  • Posts: 48
Re: Super CDRom 2 Issues, there's more! :s
« Reply #13 on: April 16, 2009, 04:48:22 AM »
The Pro card is cheaper than the Duo one  8-[ Do they effectively do the same thing (with one having the System 3.0 software on as well) or are both compatible with the Core?
My own Retro gaming YouTube channel: http://www.youtube.com/user/Lorfarius

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21366
Re: Super CDRom 2 Issues, there's more! :s
« Reply #14 on: April 16, 2009, 05:16:41 AM »
The Pro card is cheaper than the Duo one  8-[ Do they effectively do the same thing (with one having the System 3.0 software on as well) or are both compatible with the Core?

The Pro card is less common and usually more expensive, but not this time apparently, so buy whichever you want.  They would both work with your Super-CD; the only difference between the two is that the Duo card has only 16mb o' memory and the Pro card has 16mb plus the extra 1.5mb not found in the original PCE-CD.
U.S. Collection: 97% complete    155/159 titles