PCE-volution Poster Giveaway - Winner Selected

[henrycsc]

Thanks Zeta, I will take a look at the link.  I've posted the latest update.  Took off the super high rez version, but hopefully everyone can read this ok.

I've tried to add logos of everything (some are really obscure, and not sure if I have the right ones for everything.)

Also, I would like to add pics of the systems and different configurations (like the vacuum) before I go to press with the poster, so if anyone is willing to share pics of your setup, please let me know.

Thanks again for the feedback!

[henrycsc]

Is this webauthor on pcenginefx?  http://www6.airnet.ne.jp/wataru/pce/pc_hard.htm

Would someone be willing to translate a request for me? 
I'd like to ask the webauthor for permission to use their hardware images.

Yeah, sorry, I was on a phone when I typed that and didn't have the bookmark:

http://www6.airnet.ne.jp/wataru/pce/pc_hard.htm

[SignOfZeta]

As far as I know he pretty much totally left the scene years ago.

[henrycsc]

OK, I've updated it again.  Added some pics, but I would prefer not to use internet pics in the final product, so if anyone would like to send me a similar pic of their setup/setups  (Box and/or hardware)  I would appreciate it!

Missing the following part numbers:  (I think I have most of the US stuff, so I will check it out and add anything I'm missing to the parts list below.)  Thanks for the help!

PCE Karaoke Microphone
PCE RF Switch Electric Holli

PCE Daito Battle Stick 307
PCE Imaginer Stick (6 Button)
PCE Join Tap 3

RGB Monitor PC-KD863G AC Adapter

PCE Shuttle AC Adapter
PCE Core Grafx AC Adapter
PCE Core Grafx II AC Adapter
AC Adapter for any other PCE Component (Virtual Cushion, Amp, Speakers, etc)

Sharp X1-Twin AC Adapter
Sharp X1-Twin PCE Controller

LaserActive NEC Turbo PAD (other than PI-PD006)
LaserActive AC Adapter

Turbo Grafx 16 PAL System
Turbo Grafx 16 PAL System AC Adapter
Turbo Grafx 16 PAL System Turbo Pad

Thanks everybody!

[turbogrfxfan]

Yeah, sorry, I was on a phone when I typed that and didn't have the bookmark:

http://www6.airnet.ne.jp/wataru/pce/pc_hard.htm
[/quot

i wonder what x_1 twin looks like?


i would like a poster! how much?

[henrycsc]

Another update!  Added All the US part numbers, Vistar, and some other graphics.

Info still needed is listed in the first post.  Thanks for looking.

[henrycsc]

Updated again.  I'm getting it close to where I want it.  I'm going to get a test poster print run to check out the quality.  In the meantime, I will post pics of my setups.

If anyone is willing to volunteer to provide me pics of their setups, that would be awesome!  I'd rather not use internet copies if possible.


I would like to get pics of these setups:
For the pics, if possible, I'd like to have a white background (maybe a sheet would work) with the hardware setting to the left of the box, similar to the Duo-R and Duo-RX pics on the poster now.

Boxed US Turbo Duo  (I would like the hardware on the right of the box in this pic)

Boxed PC Engine Core Grafx
Boxed PC Engine Core Grafx II
Boxed PC Engine Shuttle

Boxed CD-Rom2  (Rom only, not with IFU)
Boxed Super CD-Rom2
Boxed PC Engine Duo
Boxed PC Engine Duo-R Thanks Opethian
Boxed PC Engine Duo-RX
Boxed PC Engine GT
Boxed PC Engine LT

Boxed TurboGrafx PAL   (I would like the hardware on the right of the box in this pic)
Boxed Vistar  (Hardware only would be ok, boxed is probably super RAER!)

These don't have to be boxed, but the setup would be cool!
Sharp X1 Twin
Laseractive with Pac-N1 or Pac-N10
NEC Laseractive with LD-Rom
Monitor PC-KC863G

Executive Briefcase:  PC Engine LT docked in the CD Interface Unit
Vacuum:  Supergrafx docked in the Super CD-Rom2  Thanks Opethian
: PC Engine LT w/adapter docked into the Super CD-Rom2

I'd also like to start a contest to give a nickname the PC Engine LT setup docked into the Super CD-Rom2 w/ adapter (I'm sure there's a nickname for it in Japan, but it needs one here.)

I will pick the nickname I like best from what you guys post here.  The first person to post that nickname will get 1 free copy of the new poster when it's finished.

Rules:
Only 1 nickname per member
Nickname must be posted here by August 10th, 2010.
If you are outside the US, I will ask that you pay shipping costs to your country.
If you win, you can't complain about how long it takes me to get the poster printed (because, it still is a work in progress.)

[Opethian]

I posted my vacuum setup. and Boxed DUO-R

[henrycsc]

Added PC Boy and updated some of the graphics.

[turbogrfxfan]

hey your poster is really comming along huh?!?!?

[henrycsc]

Thanks Turbo,  I'm going to try to research the last part numbers this weekend, then try to get a test poster printed.  If it turns out well, I will get a price and start taking pre-orders if anybody wants one.

[Necromancer]

To go with the PC Boy, add in the Jamiko PC-II IC Card System (DY-730), a clone of the CoreGrafx I.

[hoobs88]

Do you still need photos of the NEC Laseractive and PC Engine LT with Super CD/Briefcase? If so, I can take some shots of them later for you.

[henrycsc]

That would be awesome Hoobs!
If possible, can you take them with a white/uniform color background, like on a bedsheet or something similar?  Thanks.

Which connection do you have between the LT and the Super CD Rom2?  RAU-30 or the LT/SCD2 Adapter?

Do you still need photos of the NEC Laseractive and PC Engine LT with Super CD/Briefcase? If so, I can take some shots of them later for you.

[hoobs88]

That would be awesome Hoobs!
If possible, can you take them with a white/uniform color background, like on a bedsheet or something similar?  Thanks.

Which connection do you have between the LT and the Super CD Rom2?  RAU-30 or the LT/SCD2 Adapter?

I have both the Briefcase and the LT/SCD2 adapter. I just got home from a 13 hour day at work so I'll take a picture of the LT now and get the NEC Laseractive tomorrow.