Turbo duo please set a disc new lector

[sasuke2907]

Good morning to all and sorry for the spelling I am using a translator because I'm not English speaking
I gave it a turbo duo without audio and without running the CD with the lord of thunder and Altered Beast and more than 10 on the same day I bought on ebay  
 Thanks to this site I heard about audio capacitors and sound change and I have also changed and now the reader turns but PLEASE SET A DISC put me with all games and music CDs that might be? is like when you touch the pots? thanks

[BlueBMW]

Typically, sound problems are caused by leaking capacitors near the audio amp.  "please set cd" issues can be caused by either laser adjustment problems (the pots you mentioned) or a worn out laser that will require a replacement (search for a HOP-M3 laser)

There are a few of us on here that wouldn't mind tackling such repairs if you didn't want to try and do them yourself.  Are you in the USA or overseas?

[sasuke2907]

I am abroad the sound is finished repairing the laser is again m3 hop just that I get on screen pleas

Typically, sound problems are caused by leaking capacitors near the audio amp.  "please set cd" issues can be caused by either laser adjustment problems (the pots you mentioned) or a worn out laser that will require a replacement (search for a HOP-M3 laser)

There are a few of us on here that wouldn't mind tackling such repairs if you didn't want to try and do them yourself.  Are you in the USA or overseas?

I am abroad the sound is finished repairing the laser is again m3 hop just that I get on screen please set a disc

[BlueBMW]

If you replace the laser, you typically need to perform an adjustment using those 5 adjustment pots.  There are some discussion threads on here describing each pot and what they adjust.  Sometimes its a trial and error process, but note down the positions of the pots before you start changing them!

Also, are you using original games or CDR copies?

[sasuke2907]

If you replace the laser, you typically need to perform an adjustment using those 5 adjustment pots.  There are some discussion threads on here describing each pot and what they adjust.  Sometimes its a trial and error process, but note down the positions of the pots before you start changing them!

Also, are you using original games or CDR copies?

I'm using original audio cd I'm playing with the pots turn smoothly but after a while it stops and says please set a disc

[BlueBMW]

Start with vr102 and adjust it to the middle point where the cd will spin.  Then go to vr104 and do the same.  You may have to alternate between the two to get it right.  Next i do vr101 and 103. Those two you have to do by ear.  Vr103 turn clockwise until the laser quiets down but stop if it starts to get louder.  Vr101 has a small range that will work.  Again adjust it until the laser quiets down.  Vr105 is a little tricky.  It adjusts for speed compensation... you have to play with it to find the right spot for reliable operation.

[sasuke2907]

Start with vr102 and adjust it to the middle point where the cd will spin.  Then go to vr104 and do the same.  You may have to alternate between the two to get it right.  Next i do vr101 and 103. Those two you have to do by ear.  Vr103 turn clockwise until the laser quiets down but stop if it starts to get louder.  Vr101 has a small range that will work.  Again adjust it until the laser quiets down.  Vr105 is a little tricky.  It adjusts for speed compensation... you have to play with it to find the right spot for reliable operation.

already done now and the games are all the while reading the reader moves from one place to another looking for pump.The but you can throw all the time without stopping and asin in the time Audio cd stand what else can be fire .... I'm about to put him

[BlueBMW]

The adjustments are very precise.  Even 5 degrees can be the difference between working or not.

[sasuke2907]

The adjustments are very precise.  Even 5 degrees can be the difference between working or not.

Already it and I begin asin ba very thin it seems that berry to reading and for at one stroke estara defective the new lens not bendra without to calibrate which is for fault the values of the lens thank you

[BlueBMW]

So you said you have replaced the laser already?  And it still wont work when adjustments are made?

[sasuke2907]

So you said you have replaced the laser already?  And it still wont work when adjustments are made?

if new is not bad if will not know what else to look