Galaxy Policewoman Legend Sapphire Booties - All Gone!

[Necromancer]

Just asking cause I have yet to acquire a Arcade card, so I tried it in Magic Engine using System Card 3.0 and it kept bombing out right after first stage character selection.

Are you using a real system card image?  The built in cards are flaky as hell.

[turbo_sage]

Just asking cause I have yet to acquire a Arcade card, so I tried it in Magic Engine using System Card 3.0 and it kept bombing out right after first stage character selection.

Are you using a real system card image?  The built in cards are flaky as hell.

I was pretty sure I was, I'll have to take a closer look when I get home tonight.

[Vecanti]

Just asking cause I have yet to acquire a Arcade card, so I tried it in Magic Engine using System Card 3.0 and it kept bombing out right after first stage character selection.

Are you using a real system card image?  The built in cards are flaky as hell.

Is there such a thing as an Arcade Card image?

[nikdog]

no pages in there but i could print on the inside the general controls if someone wants to scan them in for me off there original manual?

Video Game Den has the entire manual available as a pdf.

Did he have to watermark every damn page? :/

[Tablet]

PM Sent, Oh I hope I haven't missed out on this playing Sapphire on PSP just isn't the same!

[BlueBMW]

There are still plenty left for anyone still wanting these.   These are staying a pcenginefx exclusive for now.  I haven't mentioned them on any other gaming site.

[Sparky]

done & done...

   

& no water marks!
sorry for the "blah" picts, from me phone.

[Necromancer]

Oh yeah, that looks sexy.

[Marll]

Ohhhh...that looks nice.

[GohanX]

Is there such a thing as an Arcade Card image?

The system cards can be found as ROM files, just like any game. I'm not familiar with the PC emulators since I stick to the real hardware, but I think you can just load it as any other rom, and then hit the Run button to start the CD.

[Necromancer]

I'm not familiar with the PC emulators since I stick to the real hardware, but I think you can just load it as any other rom, and then hit the Run button to start the CD.

In Magic Engine, you set the path to the system cards in its configuration file, which allows you to boot from more than one disc drive (logical or virtual).

Though on second thought, maybe there isn't a separate Arcade Card option, considering it's just additional memory and not a different bios.  If I was at home, I could check the configuration file, but I'm not. 

[nikdog]

The rom of an Arcade Card and the Super CDRom cards are the same. Arcade card just has additional vram. It is an on/off option in mednefan. In fact if you load the ver. 3 rom in mednafen it only loads the rom and thus you get a regular CDROM2 splash screen that is ver. 3.


without supercd ram and arcade vram   with supercd ram and arcade vram

[Arkhan]

I'm not familiar with the PC emulators since I stick to the real hardware, but I think you can just load it as any other rom, and then hit the Run button to start the CD.

In Magic Engine, you set the path to the system cards in its configuration file, which allows you to boot from more than one disc drive (logical or virtual).

Though on second thought, maybe there isn't a separate Arcade Card option, considering it's just additional memory and not a different bios.  If I was at home, I could check the configuration file, but I'm not. 

f*ck that jive, I used to open System Card 3 like any other .pce, and then you push run, and it loads CDs

As long as you yknow, have one in a drive, or mounted up.

[Vecanti]

I'm not familiar with the PC emulators since I stick to the real hardware, but I think you can just load it as any other rom, and then hit the Run button to start the CD.

In Magic Engine, you set the path to the system cards in its configuration file, which allows you to boot from more than one disc drive (logical or virtual).

Though on second thought, maybe there isn't a separate Arcade Card option, considering it's just additional memory and not a different bios.  If I was at home, I could check the configuration file, but I'm not. 

f*ck that jive, I used to open System Card 3 like any other .pce, and then you push run, and it loads CDs

As long as you yknow, have one in a drive, or mounted up.

I do what Arkan says, and open up .pce for Syscard 3.  Stryder actuall works this way.  If I play Stryder with the built in MagicEngine system card it has glitches and is pretty much unplayble.  Didn't know this for a long time.

@nikdog
Thanks for the explanation.  I thought all this time when I loaded the SuperCD card image (with option for Arcade ram) it wasn't really quite the same as an Arcade card image.  I've never used a real Arcade card and thought it was a different version with possibly a different startup screen (cd player etc).  So good to know it is the same rom image as the v3.  Makes sense now that you explain it.

[Duo_R]

I wish there was an arcade card bootup screen.