Author Topic: pc engine duo-r problem  (Read 306 times)

yukin

  • Newbie
  • *
  • Posts: 10
pc engine duo-r problem
« on: January 02, 2011, 03:12:29 PM »
hi, i replace the laser in my pc engine and now when i press run it do a little sound then nothing. and on the screen it stay at the waiting.

someone can help me?

Tatsujin

  • Hero Member
  • *****
  • Posts: 12311
Re: pc engine duo-r problem
« Reply #1 on: January 02, 2011, 03:25:33 PM »
your laser is defective.
www.pcedaisakusen.net
the home of your individual PC Engine collection!!
PCE Games coundown: 690/737 (47 to go or 93.6% clear)
PCE Shmups countdown: 111/111 (all clear!!)
Sega does what Nintendon't, but only NEC does better than both together!^^

yukin

  • Newbie
  • *
  • Posts: 10
Re: pc engine duo-r problem
« Reply #2 on: January 02, 2011, 04:36:57 PM »
ah ok, i found the problem, a wire on the white plug is remove. is they anyway a can get a new one?

blueraven

  • Hero Member
  • *****
  • Posts: 4450
Re: pc engine duo-r problem
« Reply #3 on: January 02, 2011, 10:40:26 PM »
ah ok, i found the problem, a wire on the white plug is remove. is they anyway a can get a new one?

Be very careful, and re-solder the wire to the connector on the plug. Do Not Pull!! That's usually how those come apart in the first place.
[Thu 10:04] <Tatsujin> hasd a pasrtty asnd a after pasrty ASDFTERTHE PARTY
[Fri 22:47] <Tatsujin> CLOSE FIGHTING STREET; CLOSE FORU; CLOSE INTERNETZ; CLOSE WORLD; CLOSE UNIVERSUM
--
Arkhan [05:15pm]: ill brbl im going to go make another free game noone plays lolol

yukin

  • Newbie
  • *
  • Posts: 10
Re: pc engine duo-r problem
« Reply #4 on: January 06, 2011, 10:33:37 AM »
ok i resolder the wire in the plug, then i test it. it not give me anymore a strange beep. now the light busy stay on and the cd turn. but it stuck at just a moment...

is it again the laser or something else?

Platinumfungi

  • Sr. Member
  • ****
  • Posts: 260
Re: pc engine duo-r problem
« Reply #5 on: January 10, 2011, 12:05:45 PM »
What issues was the system exhibiting that made you decide to replace the laser? Was everything working properly before you replaced the laser?

yukin

  • Newbie
  • *
  • Posts: 10
Re: pc engine duo-r problem
« Reply #6 on: January 11, 2011, 03:08:16 PM »
before i chnage the laser, i could not read any disc. thats why i chnage it. but i think the laser i buy is defect. cause everything seem to work at the execption of the laser that not moving when i press run. the cd and the busy red light open but it stuck on the boot screen