Author Topic: PCEGT replace with 3.5inch TFT LCD  (Read 6775 times)

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #120 on: April 28, 2012, 03:48:31 AM »
im sure it would be.
4" is an off size as 3.5" and 4.2" are common

gerard

  • Newbie
  • *
  • Posts: 5
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #121 on: May 22, 2012, 03:05:32 AM »
I am interested in the mod, are you still taking orders?
Thanks.

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #122 on: May 22, 2012, 04:20:13 PM »
sure, just been busy

Bernie

  • Guest
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #123 on: May 23, 2012, 06:12:18 AM »
Im gonna get this done at some point too.  Just gotta get an express or gt.

NightWolve

  • Hero Member
  • *****
  • Posts: 5277
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #124 on: May 24, 2012, 07:23:51 PM »
I was very tempted by this, but I ultimately decided against it since a) it's extremely rare for me to pick up my Express and play it anyway, AND b) the 3.5" LCD panel that they're using can only be connected via a composite signal, not the raw RGB signal... They tell me it still looks much better than the original (which I assume is analog RGB connected), but you essentially have to switch to the worst video connection method (only slightly better than RF). When/if they figure out how to connect it via RGB, then maybe I'll think about it. Call me picky! ;)

This is the panel, image attached: NEW 3.5" TFT TomTop LCD Color Screen Car Rearview Monitor DVD VCR

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #125 on: May 25, 2012, 03:13:39 AM »
RGB would be much simpler
just finding a display to use it is about impossible

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #126 on: May 25, 2012, 07:51:48 AM »
Nightwolf, you don't know what you're missing. It's like night and day. The quality of the new LCD versus the old stock screen is so much better that it makes up for using an "inferior" signal. Check out this video I made for YouTube. Hope you didn't mind thesteve:)
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

NightWolve

  • Hero Member
  • *****
  • Posts: 5277
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #127 on: May 25, 2012, 09:15:57 AM »
Oh wow, you did a full-on video for it! That's cool! Ah, a Filipino guy, eh?

Anyhow, it's definitely interesting and it looks great! To borrow what esteban said, "I don't know if I actually 'need' the LCD Mod for my Express, but I'm beginning to want it!" ;)

Technical inquiry: So if I understand this correctly, the composite sync pin (44) out of the hu6260 chip is disabled by default when it comes to the TurboExpress because it's inherently connected via raw RGB to its native LCD panel? I would guess they disabled it to save power or something and since it wasn't necessary, that correct ?? And as such, the circuit that 'thesteve' designed manages to re-enable composite sync in order to feed that signal to the new LCD panel because that was the easiest path towards achieving a video connection?

HercTNT

  • Hero Member
  • *****
  • Posts: 1460
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #128 on: May 25, 2012, 10:50:11 AM »
a friend of mine has two turbo's one with steve's screen and one without. Not only does the new screen trump the old one by a mile, but steves recap also makes the sound crystal clear and loud. unless you want to keep your's stock (nothing wrong with that), the new screen is a must in my book.

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #129 on: May 25, 2012, 12:46:24 PM »
the stock screen uses pin44 comp sync
by default pin40 lum, pin33 R-Y, pin26 B-Y, and pin20 color burst are disabled as they were not needed.
i enable them

NightWolve

  • Hero Member
  • *****
  • Posts: 5277
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #130 on: May 25, 2012, 01:15:48 PM »
Ah, gotcha! Thanks steve, you're very detailed and verbose with your answers... ;)

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #131 on: June 20, 2012, 10:54:24 AM »

steve where did you get your acrylic?






Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #132 on: June 20, 2012, 11:55:08 AM »
i use the acrylic from the new screen.
i cut it to fit

meka

  • Full Member
  • ***
  • Posts: 232
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #133 on: June 28, 2012, 05:17:32 AM »
Steve are you still offering this mod with the region mod, my pc engine gt is dying even though it has been recapped, with this mod you can actually read text which is good for Japanese RPG's. I'm really wanting this done.
Thanks

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: PCEGT replace with 3.5inch TFT LCD
« Reply #134 on: June 28, 2012, 07:17:54 AM »
yes pm me